[PCB_FORUM] Re: How to output a Pin/function Swap list.

Hi all,

So what format do I use.  I used this format before.

CHANGEPIN   FPGA1      A1        A8

But I can't figure out the format for two different component since there is two different reference designator.  When I try it with both of the reference designator it claimed to have too many columns.  If anyone have any answers please let me know.  Thank you in advance for your advise.

Seiji

From: J-Charles TEYSSIER <jcteyssier@xxxxxxxxxxxxxxx>
Reply-To: icu-pcb-forum@xxxxxxxxxxxxx
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: How to output a Pin/function Swap list.
Date: Wed, 20 Dec 2006 13:18:28 +0100

Seiji,

if you use orcad capture and allegro, you can backannotate directly in capture.
It works fine.
In capture, select your dsn, Tools-> Backannotate

Jean-Charles

arimitsu seiji a 馗rit :

Hi Moris,

Thank you for the reply.  Is this format something I can back annotate into OrCAD?  The format is different than what I am use to. 

Also does this method work for function swaps between two different connectors?  I wasn't able to back annotate the swaps made between two different connector the way I did in the past either. 

I will be trying to figure things out.  If you have any solutions please let me know.  I appreaciate your help.

Thank you,

Seiji

From: "Ruso, Moris / Miga-Cad Ltd." <moris@xxxxxxxxxxx>
Reply-To: icu-pcb-forum@xxxxxxxxxxxxx
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: How to output a Pin/function Swap list.
Date: Tue, 19 Dec 2006 08:46:18 +0200

I use the [i] button and select Comps from the palette, and select the BGA I want to output the swap list.
I do it once for the old and once for the new and import them to the excel to form a PIN# | OLD | NEW style worksheet. It takes only 2-3 minutes , fast and efficient.

regards,
Moris

arimitsu seiji wrote:
Hi All,
�
I am back again with more questions.
�
We have a little program that gives us pin swap list most/some of the time no problem by comparing board before and after pinswap.� Only problem is it's most/some of the time only and we have to do lots of fiddling to get the data to output.� Is there a skill or some sort of report that Allegro outputs that gives us the pin/function swap list?�
�
Thank you in advance for all the help.
Seiji
----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list go to http://www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx ----------------------------------------------------------- 

#####################################################################################


This Mail Was Scanned by 012.net AntiVirus Service2- Powered by TrendMicro 
Interscan
----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list go to http://www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx -----------------------------------------------------------
----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list go to http://www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx -----------------------------------------------------------
----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list go to http://www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx -----------------------------------------------------------
----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list go to http://www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx -----------------------------------------------------------

Other related posts: