[PCB_FORUM] Re: How to make different colors for different nets

 
You also can window across a series of nets, or prepare a text file
containing the netnames you want to hilight and read it in using the
"List" option in the find window.
 
 
-- 
George Patrick
Tektronix, Inc.
Central Engineering, EDS Applications Support
P.O. Box 500, M/S 39-512
Beaverton, OR 97077-0001
* 503-627-5272 (voice)     * 503-627-5587 (fax)
<http://www.tektronix.com/> 
http://www.tektronix.com     <http://www.pcb-designer.com/>
http://www.pcb-designer.com
 
"Off-Grid and Proud of it!"

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Michael
Sent: Tuesday, January 23, 2007 08:33
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: How to make different colors for different nets



Hi Alan,

      Thanks for your comments. How about if for tens of nets? Do I have
to manually highlight the net and change "permanent highlight color" one
by one for so many nets? Is there any some like automatic function?

 

Michael

 

 


  _____  


From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Ritter, Alan
Sent: Wednesday, January 24, 2007 12:24 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: How to make different colors for different nets

 

Use the "permanent highlight" function.  This allows selection of
specific colors and then you can highlight nets with various colors.  I
frequently use this for power/ground nets so I can quickly glance at a
board and make sure shapes on my divided planes cover the correct
pins/vias.

 

/s/jar (alan.ritter@xxxxxxxxxx)

     http://www.mtritter.org

 


  _____  


From: Michael [mailto:michaelnwwang@xxxxxxxxx] 
Sent: Tuesday, January 23, 2007 10:15 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] How to make different colors for different nets

 

Hi Group,

 

      I have seen some allegro database which had different highlight
colors for different nets. It seems highlight was used. You know, in
some condition, it's easier to make the layout clear by using different
color for different nets. I'm interested in how to do it easily in
allegro. Could anybody help me?

 

 

Thanks,

Michael

----------------------------------------------------------- To
subscribe/unsubscribe: Send a message to
icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or
unsubscribe To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/ Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
----------------------------------------------------------- 






EMAIL DISCLAIMER 



Please Note: The information contained in this message may be
privileged and 

confidential, protected from disclosure, and/or intended only for the
use of

the individual or entity named above. If the reader of this message is
not

the intended recipient, or an employee or agent responsible for
delivering

this message to the intended recipient, you are hereby notified that any

disclosure, distribution, copying or other dissemination of this

communication is strictly prohibited. If you received this communication
in

error, please immediately reply to the sender, delete the message and 

destroy all copies of it.



Thank You

Other related posts: