[PCB_FORUM] Re: How to make different colors for different nets

Hi Alan,

      Thanks for your comments. How about if for tens of nets? Do I have to
manually highlight the net and change "permanent highlight color" one by one
for so many nets? Is there any some like automatic function?

 

Michael

 

 

  _____  

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Ritter, Alan
Sent: Wednesday, January 24, 2007 12:24 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: How to make different colors for different nets

 

Use the "permanent highlight" function.  This allows selection of specific
colors and then you can highlight nets with various colors.  I frequently
use this for power/ground nets so I can quickly glance at a board and make
sure shapes on my divided planes cover the correct pins/vias.

 

/s/jar (alan.ritter@xxxxxxxxxx)

     http://www.mtritter.org

 

  _____  

From: Michael [mailto:michaelnwwang@xxxxxxxxx] 
Sent: Tuesday, January 23, 2007 10:15 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] How to make different colors for different nets

 

Hi Group,

 

      I have seen some allegro database which had different highlight colors
for different nets. It seems highlight was used. You know, in some
condition, it's easier to make the layout clear by using different color for
different nets. I'm interested in how to do it easily in allegro. Could
anybody help me?

 

 

Thanks,

Michael

----------------------------------------------------------- To
subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe To view the archives of this list
go to http://www.freelists.org/archives/icu-pcb-forum/ Problems or
Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
----------------------------------------------------------- 








EMAIL DISCLAIMER 



Please Note: The information contained in this message may be  privileged
and 

confidential, protected from disclosure, and/or intended only for the use of

the individual or entity named above. If the reader of this message is not

the intended recipient, or an employee or agent responsible for delivering

this message to the intended recipient, you are hereby notified that any

disclosure, distribution, copying or other dissemination of this

communication is strictly prohibited. If you received this communication in

error, please immediately reply to the sender, delete the message and 

destroy all copies of it.



Thank You

Other related posts: