[PCB_FORUM] Re: How to export Constraint Set of a Board File

You need to do a File -> Export -> Tech file this will output the Spacing and 
Physical constraints.
 
I believe this is a Performance and Expert only feature.. 
 
-----Original Message-----
From: Aries_Lumague@xxxxxxxxxxxxxx
To: icu-pcb-forum@xxxxxxxxxxxxx
Sent: Tue, 15 Aug 2006 17:29:01 +0800
Subject: [PCB_FORUM] Re: How to export Constraint Set of a Board File




Hi Peter,

I tried your suggestion, but it only shows the used Constraint Set (Physical and
Spacing Rule Sets)

thanks

ahrys





"Peter Hughes" <phughes@xxxxxxxxx> on 08/15/2006 05:06:33 PM

Please respond to icu-pcb-forum@xxxxxxxxxxxxx
                                                              
                                                              
                                                              
 To:      icu-pcb-forum@xxxxxxxxxxxxx                         
                                                              
                                                              
 cc:      (bcc: Aries Lumague/WHQ/Wistron)                    
                                                              
                                                              
                                                              
                                                              
 Subject: [PCB_FORUM] Re: How to export Constraint Set of a   
          Board File                                          
                                                              


This document is classified as     Normal



Hi Ahrys,

To export constraints from a board.

Open the Constraint Manager. Setup -> Electrical Constraint Spreadsheet
In the Constraint Manager run the File->Export->Constraints command.
This will output all constraints in the Constraint Manager.

Rgrds

Peter Hughes,
PCB Designer,
Concurrent Technologies,
4 Gilberd Close,
Newcomen Way,
Colchester,
Essex,
CO4 4WN.
Tel: +44 1206 752626
Fax: +44 1206 751116

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of
Aries_Lumague@xxxxxxxxxxxxxx
Sent: 15 August 2006 09:35
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] How to export Constraint Set of a Board File



Hi All,

Is there a way to export all the Constraint Set -- physical and spacing
constraint sets (both used and unused Constraint sets) of a board file

thanks
ahrys


-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------



-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: