[PCB_FORUM] Re: How to create custom shape

Eileen, are you creating the shape for a pad stack or in Allegro
Designer Or Shape symbol?
 
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx 
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Eileen Ong
Sent: Monday, August 21, 2006 5:33 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] How to create custom shape
 
 
Hi,
 
1) I will like to create a custom shape as below, kindly advise how to create?
 

 
 
2)  I'm trying to measure the distance between center of pad to center of pad 
(see below). Pin 1 is able to click to the center of the pad but pin 2 always 
click to the bottom corner 
(offset xy : 4mils) from left bottom corner. How do I measure and snap to the 
center of pin 2?

JPEG image

JPEG image

Other related posts: