[PCB_FORUM] Re: How do you make a REFDES invisible?

It is exactly what i do.
Subclass named UNUSED_TOP and UNUSED_BOTTOM.

Jean-Charles

Les Wong a écrit :

What I do is create a couple of new subclasses under the class refdes:
top_hidden and bottom_hidden.
I just change the text to the approriate hidden subclass if I do not want it to 
show up on the board.


--- On *Sun, 8/24/08, Austin Franklin /<allegrolist@xxxxxxxxxxxx>/* wrote:

    From: Austin Franklin <allegrolist@xxxxxxxxxxxx>
    Subject: [PCB_FORUM] Re: How do you make a REFDES invisible?
    To: icu-pcb-forum@xxxxxxxxxxxxx
    Date: Sunday, August 24, 2008, 7:48 PM

    Or...a symbol level property "REFDES_VISIBLE" (or invisible, I
    don't care).

    Regard,

    Austin

    > -----Original Message-----
    > From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
    > [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of richard moffat
    > Sent: Sunday, August 24, 2008 10:46 PM
    > To: icu-pcb-forum@xxxxxxxxxxxxx
    > Subject: [PCB_FORUM] Re: How do you make a REFDES invisible?
    >
    >
    > Hi
    >
    > There's probably several ways.
    > Personally, I don't have a conscience about deleting text of,
    > say, bypass caps under BGAs.
    >
    > It would be a reasonable request for Cadence - able to move the
    > text to a "REFDES_HIDDEN" subclass.
    >
    > Cheers,
    > Richard
    >
    > >>> "Austin Franklin" <allegrolist@xxxxxxxxxxxx>
    25/08/2008 2:36 p.m. >>>
    > Hi Richard,
    >
    > May be.  I figured at the symbol level, I should be able to
    > suppress REFDES.
    > If I can't do it that way, then I guess deleting it is the
    > answer...thanks.
    >
    > Regards,
    >
    > Austin
    >
    > > -----Original Message-----
    > > From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
    > > [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of richard
    moffat
    > > Sent: Sunday, August 24, 2008 10:33 PM
    > > To: icu-pcb-forum@xxxxxxxxxxxxx
    > > Subject: [PCB_FORUM] Re: How do you make a REFDES invisible?
    > >
    > >
    > > Hi Austin
    > >
    > > You could:
    > >   - move the text off board
    > >  - delete the text - it still keeps the REFDES internally.
    > > (Component needs to be removed from the board and replaced again
    > > to retrieve it, or can be added again by SKILL.)
    > >
    > > Does this help?
    > >
    > > Cheers,
    > > Richard
    > >
    > > >>> "Austin Franklin"
    <allegrolist@xxxxxxxxxxxx> 25/08/2008
    > 2:26 p.m. >>>
    > > Hi,
    > >
    > > Subject line says it all ;-)  Like the REFDES for a mounting hole.
    > >
    > > Regards,
    > >
    > > Austin
    > >
    > > NOTICE: This message contains privileged and confidential
    > > information intended only for the use of the addressee
    > > named above. If you are not the intended recipient of
    > > this message you are hereby notified that you must not
    > > disseminate, copy or take any action in reliance on it.
    > > If you have received this message in error please
    > > notify Allied Telesis Labs Ltd immediately.
    > > Any views expressed in this message are those of the
    > > individual sender, except where the sender has the
    > > authority to issue and specifically states them to
    > > be the views of Allied Telesis Labs.
    > > -----------------------------------------------------------
    > > To subscribe/unsubscribe:
    > > Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
    > > with a subject of subscribe or unsubscribe
    > >
    > > To view the archives of this list go to
    > > http://www.freelists.org/archives/icu-pcb-forum/
    > >
    > > Problems or Questions:
    > > Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
    > > -----------------------------------------------------------
    > >
    >
    > -----------------------------------------------------------
    > To subscribe/unsubscribe:
    > Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
    > with a subject of subscribe or unsubscribe
    >
    > To view the archives of this list go to
    http://www.freelists.org/archives/icu-pcb-forum/

    Problems or Questions:
    Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
    -----------------------------------------------------------

    NOTICE: This message contains privileged and confidential
    information intended only for the use of the addressee
    named above. If you are not the intended recipient of
    this message you are hereby notified that you must not
    disseminate, copy or take any action in reliance on it.
    If you have received this message in error please
    notify Allied Telesis Labs Ltd immediately.
    Any views expressed in this message are those of the
    individual sender, except where the sender has the
    authority to issue and specifically states them to
    be the views of Allied Telesis Labs.
    -----------------------------------------------------------
    To subscribe/unsubscribe:
    Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
    with a subject of subscribe or unsubscribe

    To view the archives of this list go to
    http://www.freelists.org/archives/icu-pcb-forum/

    Problems or Questions:
    Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
    -----------------------------------------------------------

    -----------------------------------------------------------
To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx 
    with a subject of subscribe or unsubscribe

    To view the archives of this list go to
    http://www.freelists.org/archives/icu-pcb-forum/

    Problems or Questions:
    Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
    -----------------------------------------------------------

-----------------------------------------------------------
To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx 
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: