[PCB_FORUM] Re: How do I preserve REFDESs when packing in Allegro Design Entry HDL...
- From: "allegrolist@xxxxxxxxxxxx" <allegrolist@xxxxxxxxxxxx>
- To: icu-pcb-forum@xxxxxxxxxxxxx
- Date: Mon, 18 Apr 2011 23:25:19 -0400
Hi Jerry,
Thanks for the help. I don't have a small test case. I could try making
one...and perhaps in the morning, I may try that. This is pretty
frustrating. I know it worked correctly at one time, as an older BOM has
the correct REFDESs, but every new BOM/netlist I generate has the REDESs
redone. I really wouldn't care if they were redon if when I read it in to
the layout, it didn't unpace components that shouldn't be unplaced...and
therefore get their traces ripped up.
So, I'll figure out what to try next in the morning. It's been a very
frustrating afternoon/evenin/night trying to figure out what's going on
here.
Best Regards,
Austin
Original Message:
-----------------
From: Jerry Grzenia geraldg@xxxxxxxxxxx
Date: Mon, 18 Apr 2011 18:23:17 -0700
To: icu-pcb-forum@xxxxxxxxxxxxx, icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: How do I preserve REFDESs when packing in Allegro
Design Entry HDL...
Hi Austin,
If you have a small testcase, please send it to Customer Support, we'll
take a look at it for you.
Regards,
Jerry Grzenia
-----Original Message-----
From: allegrolist@xxxxxxxxxxxx [mailto:allegrolist@xxxxxxxxxxxx]
Sent: Monday, April 18, 2011 04:25 PM Pacific Standard Time
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: How do I preserve REFDESs when packing in
Allegro
Design Entry HDL...
Hi Jerry,
I do exactly both of those, and it still redoes the REFDESs. It makes them
sequential, and fills in the gaps. I'm obviously missing something, and
it's very frustrating. I've tried quite a few things, just not hit on the
right one yet.
Thanks!
Austin
Original Message:
-----------------
From: Jerry Grzenia geraldg@xxxxxxxxxxx
Date: Mon, 18 Apr 2011 14:01:05 -0700
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: How do I preserve REFDESs when packing in Allegro
Design Entry HDL...
Hi Austin,
First, don't "repackage". In the Export Physical form, make sure you have
"Preserve" checked:
[cid:image001.png@01CBFDE1.D26367B0]
Click on the Advanced button (upper right above), select the Layout tab.
Make sure the option for "Reuse Ref Des numbers" is NOT checked:
[cid:image002.png@01CBFDE1.D26367B0]
Jerry
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of
allegrolist@xxxxxxxxxxxx
Sent: Monday, April 18, 2011 3:31 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] How do I preserve REFDESs when packing in Allegro
Design Entry HDL...
Hi,
Every time I repackage (Design Entry HDL, 15.7), it reassigns the REFDESs.
I want to keep the existing REFDESs (and their gaps). How can I specify
this?
Thanks,
Austin
--------------------------------------------------------------------
mail2web.com - Microsoft(r) Exchange solutions from a leading provider -
http://link.mail2web.com/Business/Exchange
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
--------------------------------------------------------------------
mail2web - Check your email from the web at
http://link.mail2web.com/mail2web
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
N?.nÇ+?·¿º{.nÇ+?·?zwZ?ë,j¢'.¥Æߢ»¦ê®zË_ç¥?Ël¢¸0?ØZ²æãyËh~Ë?±Êâmê+º{.nÇ+?
·?¢ø?ÂØ^j·!?÷¬¡ûa?Éb²Ø(¶?m¶?ÿà ç¥?Ël¢¸?j·!?÷¬þ'.¥Æߢ»¦üúènW¦²?йë-??ìIéÝjw
¦j)m¢'.¥Æߢ»¦iÙ¢?Çëyéb²Û(®ã
--------------------------------------------------------------------
mail2web - Check your email from the web at
http://link.mail2web.com/mail2web
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
Other related posts:
