A comment on Mechanical parts ...
They are well defined within Allegro and the Cadence tools, but many
downstream 3rd party translators (manufacturing, ICT, etc.) don't support
them and having them in the design will result in corrupt data (I've seen
this with both Fabmaster and Circuitcam).
I define any true "mechanical" parts that are added via schematic/netlist as
"package" symbols with a small pin as Jeff suggested.
Hth,
Dave Schaefer
dave.schaefer@xxxxxxx
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Austin Franklin
Sent: Wednesday, April 29, 2009 7:45 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: How do I include .dra file that contains my board
outline in a DxD schematic?
Hi Jeff,
I don't know. It would now be an electrical item, instead of a mechanical
item. That may cause an issue. I should be able to do this without that.
People add non-electrical mounting holes to their schematics all the time,
and this should be the same thing.
Best Regards,
Austin
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Jeff Schmitt
Sent: Wednesday, April 29, 2009 8:38 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: How do I include .dra file that contains my
board outline in a DxD schematic?
Hi Austin,
I haven't followed this thread closely...but if the only error is that it
has no pin, what's the harm in adding 1 small (virtually invisible) pin on
the symbol somewhere?
Jeff
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Austin Franklin
Sent: Wednesday, April 29, 2009 7:44 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: How do I include .dra file that contains my board
outline in a DxD schematic?
Hi Nagaraj,
My schematic symbol (and dra) have REFDES. It's the pins that it's
complaining about. When reading it in when I do an import,
Allegro doesn't
like that it has no pins.
So, yes, it would be just like mounting holes that have no electrical
connection. Anyone do that with DxD?
Best Regards,
Austin
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Shanmugam,
Nagaraj
Sent: Wednesday, April 29, 2009 7:34 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: How do I include .dra file that contains my
board outline in a DxD schematic?
Austin,
The third party syntax $PACKAGES for components needs to have a refdes.
Example : 'RS0402_01A' ! RJX0087400 ! 332 ! '1%' ; R390 R391
If you need to automate the process then you need to have a refdes
defined and created as *.dra symbol. For example like NPTH mounting
hole.
Hope this helps
Nagaraj Shanmugam | Lead Designer - PCB Development
nshanmug@xxxxxxxxx
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Austin Franklin
Sent: Monday, April 27, 2009 5:46 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: How do I include .dra file that contains my
board outline in a DxD schematic?
Hi Jan,
Not sure about DxD, but with Concept (or Allegro Design Entry
HDL) as the schematic capture tool, non-electrical components
works well and we use this in every design.
(We handle the board outline as a non-electrical component, along
with other stuff of nonelectrical/mechanical nature).
Exactly what I want to do using DxD...
You have to generate non-electrical symbols as .bsm's on the
Allegro PCB Layout side.
Already done. I can place it manually, so I know that part works.
Regards,
Austin
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------