[PCB_FORUM] Re: How do I generate the drill tool file?

Excellent, thanks William.  I'll keep that in mind.  Also, if I include
"Auto Tool Select", that does it too.

Regards,

Austin

> -----Original Message-----
> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of William
> Billereau
> Sent: Tuesday, August 26, 2008 3:54 AM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Re: How do I generate the drill tool file?
>
>
> Hi Austin.
>
> If you setup the drill output to Enhanced Excellon, the tools will
> automatically be included in the file:
>
> ENHANCED_EXCELLON      YES in nc_param.txt file
>
> Will produce this:
>
> M48
> INCH
> T01C.012
> T02C.016
> T03C.032
> T04C.036
> T05C.04
> T06C.044
> T07C.047
> T08C.05512
> T09C.063
> T10C.106
> T11C.11024
> T12C.12598
> ;LEADER: 12
> ;HEADER:
> ;CODE  : ASCII
> ;FILE  : drill-1-12.drl for board EDA-01539-V2-0.brd ... layers TOP and
> BOTTOM
> ;T01 Holesize 1. = 12.000000 Tolerance = +0.000000/-0.000000 PLATED MILS
> Quantity = 593
> ;T02 Holesize 2. = 16.000000 Tolerance = +0.000000/-0.000000 PLATED MILS
> Quantity = 2707
> ;T03 Holesize 3. = 32.000000 Tolerance = +0.000000/-0.000000 PLATED MILS
> Quantity = 34
> ;T04 Holesize 4. = 36.000000 Tolerance = +0.000000/-0.000000 PLATED MILS
> Quantity = 277
> ;T05 Holesize 5. = 40.000000 Tolerance = +0.000000/-0.000000 PLATED MILS
> Quantity = 8
> ;T06 Holesize 6. = 44.000000 Tolerance = +0.000000/-0.000000 PLATED MILS
> Quantity = 2
> ;T07 Holesize 7. = 47.000000 Tolerance = +0.000000/-0.000000 PLATED MILS
> Quantity = 1
> ;T08 Holesize 8. = 55.120000 Tolerance = +0.000000/-0.000000 PLATED MILS
> Quantity = 8
> ;T09 Holesize 9. = 63.000000 Tolerance = +0.000000/-0.000000 PLATED MILS
> Quantity = 50
> ;T10 Holesize 10. = 106.000000 Tolerance = +0.000000/-0.000000 PLATED
> MILS Quantity = 4
> ;T11 Holesize 11. = 110.240000 Tolerance = +0.000000/-0.000000 PLATED
> MILS Quantity = 18
> ;T12 Holesize 12. = 125.980000 Tolerance = +0.000000/-0.000000 PLATED
> MILS Quantity = 3
> %
> G90
> T01
> X038050Y047200
> X038405Y050150
> X038301Y047415
>
>       William.
>
>
> > -----Original Message-----
> > From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-
> > bounce@xxxxxxxxxxxxx] On Behalf Of Austin Franklin
> > Sent: 26 August, 2008 5:23 AM
> > To: icu-pcb-forum@xxxxxxxxxxxxx
> > Subject: [PCB_FORUM] Re: How do I generate the drill tool file?
> >
> > I figured out that problem.  It doesn't generate a drill tool file,
> per
> > se.
> > It puts the info in the log file.  I  checked the "Auto Tool Select"
> > box,
> > and it solved the problem and put the tool info in the drill file.
> >
> > Regards,
> >
> > Austin
> >
> > > -----Original Message-----
> > > From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> > > [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Austin
> > Franklin
> > > Sent: Monday, August 25, 2008 8:58 PM
> > > To: icu-pcb-forum@xxxxxxxxxxxxx
> > > Subject: [PCB_FORUM] How do I generate the drill tool file?
> > >
> > >
> > > I can generate the drill file (.drl), but how do I generate the
> drill
> > tool
> > > file?
> > >
> > > Regards,
> > >
> > > Austin
> > >
> > > -----------------------------------------------------------
> > > To subscribe/unsubscribe:
> > > Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> > > with a subject of subscribe or unsubscribe
> > >
> > > To view the archives of this list go to
> > > http://www.freelists.org/archives/icu-pcb-forum/
> > >
> > > Problems or Questions:
> > > Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> > > -----------------------------------------------------------
> > >
> >
> > -----------------------------------------------------------
> > To subscribe/unsubscribe:
> > Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> > with a subject of subscribe or unsubscribe
> >
> > To view the archives of this list go to
> > http://www.freelists.org/archives/icu-pcb-forum/
> >
> > Problems or Questions:
> > Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> > -----------------------------------------------------------
> -----------------------------------------------------------
> To subscribe/unsubscribe:
> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> with a subject of subscribe or unsubscribe
>
> To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: