[PCB_FORUM] Re: How do I generate the drill tool file?

Hi Austin.

If you setup the drill output to Enhanced Excellon, the tools will
automatically be included in the file:

ENHANCED_EXCELLON      YES in nc_param.txt file

Will produce this:

M48
INCH
T01C.012
T02C.016
T03C.032
T04C.036
T05C.04
T06C.044
T07C.047
T08C.05512
T09C.063
T10C.106
T11C.11024
T12C.12598
;LEADER: 12 
;HEADER: 
;CODE  : ASCII 
;FILE  : drill-1-12.drl for board EDA-01539-V2-0.brd ... layers TOP and
BOTTOM
;T01 Holesize 1. = 12.000000 Tolerance = +0.000000/-0.000000 PLATED MILS
Quantity = 593
;T02 Holesize 2. = 16.000000 Tolerance = +0.000000/-0.000000 PLATED MILS
Quantity = 2707
;T03 Holesize 3. = 32.000000 Tolerance = +0.000000/-0.000000 PLATED MILS
Quantity = 34
;T04 Holesize 4. = 36.000000 Tolerance = +0.000000/-0.000000 PLATED MILS
Quantity = 277
;T05 Holesize 5. = 40.000000 Tolerance = +0.000000/-0.000000 PLATED MILS
Quantity = 8
;T06 Holesize 6. = 44.000000 Tolerance = +0.000000/-0.000000 PLATED MILS
Quantity = 2
;T07 Holesize 7. = 47.000000 Tolerance = +0.000000/-0.000000 PLATED MILS
Quantity = 1
;T08 Holesize 8. = 55.120000 Tolerance = +0.000000/-0.000000 PLATED MILS
Quantity = 8
;T09 Holesize 9. = 63.000000 Tolerance = +0.000000/-0.000000 PLATED MILS
Quantity = 50
;T10 Holesize 10. = 106.000000 Tolerance = +0.000000/-0.000000 PLATED
MILS Quantity = 4
;T11 Holesize 11. = 110.240000 Tolerance = +0.000000/-0.000000 PLATED
MILS Quantity = 18
;T12 Holesize 12. = 125.980000 Tolerance = +0.000000/-0.000000 PLATED
MILS Quantity = 3
%
G90
T01
X038050Y047200
X038405Y050150
X038301Y047415

        William.


> -----Original Message-----
> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-
> bounce@xxxxxxxxxxxxx] On Behalf Of Austin Franklin
> Sent: 26 August, 2008 5:23 AM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Re: How do I generate the drill tool file?
> 
> I figured out that problem.  It doesn't generate a drill tool file,
per
> se.
> It puts the info in the log file.  I  checked the "Auto Tool Select"
> box,
> and it solved the problem and put the tool info in the drill file.
> 
> Regards,
> 
> Austin
> 
> > -----Original Message-----
> > From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> > [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Austin
> Franklin
> > Sent: Monday, August 25, 2008 8:58 PM
> > To: icu-pcb-forum@xxxxxxxxxxxxx
> > Subject: [PCB_FORUM] How do I generate the drill tool file?
> >
> >
> > I can generate the drill file (.drl), but how do I generate the
drill
> tool
> > file?
> >
> > Regards,
> >
> > Austin
> >
> > -----------------------------------------------------------
> > To subscribe/unsubscribe:
> > Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> > with a subject of subscribe or unsubscribe
> >
> > To view the archives of this list go to
> > http://www.freelists.org/archives/icu-pcb-forum/
> >
> > Problems or Questions:
> > Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> > -----------------------------------------------------------
> >
> 
> -----------------------------------------------------------
> To subscribe/unsubscribe:
> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> with a subject of subscribe or unsubscribe
> 
> To view the archives of this list go to
> http://www.freelists.org/archives/icu-pcb-forum/
> 
> Problems or Questions:
> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> -----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: