[PCB_FORUM] Re: How do I find out what's generating a 0 size aperture?

I set the undefined line with to a big value(1000mm!)), so when i review the gerber it is easy to find the problem and correct it. I refuse to let 0 whith entity on my borad on etch, soldermask, solderpast and so on. 

Typicaly: text, rectangle, line,... are entities ptentially set 0 with
Only documentaion layers (assembly drawing, manufacturing drawing,...) uses 0 with. 

Jean-Charles

Austin Franklin a écrit :

Hi,

I figured it out.  I just looked in the log file, and it was obvious what
was causing the problem.

Regards,

Austin



-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of David Kelly
(davidkel)
Sent: Monday, August 25, 2008 6:25 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: How do I find out what's generating a 0 size
aperture?


Austin

Check out your artwork file definitions. See if you have undefined line
width set to "0".


David Kelly
davidkel@xxxxxxxxx
720-562-6316

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Austin Franklin
Sent: Monday, August 25, 2008 4:14 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] How do I find out what's generating a 0 size
aperture?

Hi,

In one (or more, don't know) of my 274X Gerber output files, I get a
zero size aperture.  Specifically, D44 is a size of 0.  How do I find
out what's generating that D code, and why it's 0?

Regards,

Austin

-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to

http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

-----------------------------------------------------------
To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx 
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------


-----------------------------------------------------------
To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx 
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: