[PCB_FORUM] Re: How do I find out what's generating a 0 size aperture?

Hi,

I figured it out.  I just looked in the log file, and it was obvious what
was causing the problem.

Regards,

Austin


> -----Original Message-----
> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of David Kelly
> (davidkel)
> Sent: Monday, August 25, 2008 6:25 PM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Re: How do I find out what's generating a 0 size
> aperture?
>
>
> Austin
>
> Check out your artwork file definitions. See if you have undefined line
> width set to "0".
>
>
> David Kelly
> davidkel@xxxxxxxxx
> 720-562-6316
>
> -----Original Message-----
> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Austin Franklin
> Sent: Monday, August 25, 2008 4:14 PM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] How do I find out what's generating a 0 size
> aperture?
>
> Hi,
>
> In one (or more, don't know) of my 274X Gerber output files, I get a
> zero size aperture.  Specifically, D44 is a size of 0.  How do I find
> out what's generating that D code, and why it's 0?
>
> Regards,
>
> Austin
>
> -----------------------------------------------------------
> To subscribe/unsubscribe:
> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> with a subject of subscribe or unsubscribe
>
> To view the archives of this list go to
> http://www.freelists.org/archives/icu-pcb-forum/
>
> Problems or Questions:
> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> -----------------------------------------------------------
> -----------------------------------------------------------
> To subscribe/unsubscribe:
> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> with a subject of subscribe or unsubscribe
>
> To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: