[PCB_FORUM] Re: Help with uprev batch file

You shouldn't need to do it in a batch file, wildcards should work.  If it's
still working as I remember, anyways :-)

 

-- 
George Patrick
Tektronix, Inc.
Central Engineering, PCB Design Group
P.O. Box 500, M/S 39-512
Beaverton, OR 97077-0001
Phone: 503-627-5272         Fax: 503-627-5587 <http://www.tektronix.com/> 
http://www.tektronix.com     <http://www.pcb-designer.com/>
http://www.pcb-designer.com

It's my opinion, not Tektronix' 

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Mariani, Stephen
Sent: Friday, September 16, 2005 11:50
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Help with uprev batch file

 

Thanks George but I believe my problem is getting a batch file to work.
Looks like the overwrite works but it stops at the first design. I have
attached my batch file. I have 3 designs but the file only upreved 1

 

Steve

 

  _____  

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of
george.h.patrick@xxxxxxxxxxxxxx
Sent: Friday, September 16, 2005 1:37 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Help with uprev batch file

 

Try copying all the boards to their _15 names, then running uprev_overwrite
*_15.brd

 

DISCLAIMER:  I haven't done this in a LONG time, but I think that it should
work.  Your mileage may vary.

 

-- 
George Patrick
Tektronix, Inc.
Central Engineering, PCB Design Group
P.O. Box 500, M/S 39-512
Beaverton, OR 97077-0001
Phone: 503-627-5272         Fax: 503-627-5587 <http://www.tektronix.com/> 
http://www.tektronix.com     <http://www.pcb-designer.com/>
http://www.pcb-designer.com

It's my opinion, not Tektronix' 

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Mariani, Stephen
Sent: Friday, September 16, 2005 10:17
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Help with uprev batch file

 

I would like to uprev a bunch of designs from 13.6 and 14.x to 15.2 
I am not sure how this is done in a batch file, can someone help? Please see
below. 

What I would like it to do is the following: 

uprev 
board_a    (old 13.6 design) 
board_a_15 (15.2 updated design) 
board_b    (old 13.6 design) 
board_b_15 (15.2 updated design) 
board_c    (old 13.6 design) 
board_c_15 (15.2 updated design) 

The dos window sits there asking for a board name but not sure how to have
it add the name in this file? 
Then it will ask for the new name. What is the command to enter text to dos?


Thanks 
Steve 

 

Stephen Mariani 
Mercury Computer Systems, Inc. 
199 Riverneck Road 
Chelmsford, MA 01824 
Phone: (978) 967-1855 
Cell Phone: (978) 761-4101 
Fax: (978) 244-0520 
 <mailto:smariani@xxxxxx> mailto:smariani@xxxxxx

Other related posts: