[PCB_FORUM] Re: Help with uprev batch file

Steve,
    A little bit different approach, but Dbdoctor (runs uprev automatically) 
will allow wildcards. Why not copy the boards to a new folder, and then 
Dbdoctor all of them. Then you can rename them all with a script. Unless 
they're all spread out in different folders...
    Ken Kiplinger
    Design Solutions, Inc. 

        -----Original Message----- 
        From: icu-pcb-forum-bounce@xxxxxxxxxxxxx on behalf of Mariani, Stephen 
        Sent: Fri 9/16/2005 10:16 AM 
        To: icu-pcb-forum@xxxxxxxxxxxxx 
        Cc: 
        Subject: [PCB_FORUM] Help with uprev batch file
        
        

        I would like to uprev a bunch of designs from 13.6 and 14.x to 15.2 
        I am not sure how this is done in a batch file, can someone help? 
Please see below. 

        What I would like it to do is the following: 

        uprev 
        board_a    (old 13.6 design) 
        board_a_15 (15.2 updated design) 
        board_b    (old 13.6 design) 
        board_b_15 (15.2 updated design) 
        board_c    (old 13.6 design) 
        board_c_15 (15.2 updated design) 

        The dos window sits there asking for a board name but not sure how to 
have it add the name in this file? 
        Then it will ask for the new name. What is the command to enter text to 
dos? 

        Thanks 
        Steve 


        Stephen Mariani 
        Mercury Computer Systems, Inc. 
        199 Riverneck Road 
        Chelmsford, MA 01824 
        Phone: (978) 967-1855 
        Cell Phone: (978) 761-4101 
        Fax: (978) 244-0520 
        mailto:smariani@xxxxxx <mailto:smariani@xxxxxx>

Other related posts: