[PCB_FORUM] Re: Help!!! Segment with same start and end points

try running dbdoctor on the database
 

 Gerry Meier
Sr. PCB Designer
Freedom CAD Services, Inc.
Voice: (603) 864-1300 x1350
Alt. Voice: (386) 753-0048
Email: gerry.meier@xxxxxxxxxxxxxx
visit our website at<http://www.freedomcad.com
<http://www.freedomcad.com/> 



 

________________________________

From: Van Huynh (huynh) [mailto:huynh@xxxxxxxxx] 
Sent: Saturday, December 18, 2004 12:37 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Help!!! Segment with same start and end points 


I got a lots of these warning on every artwork layers,
Any one know how to fix these errors message?
 
 WARNING: Segment with same start and end points at
 (75.2869 -194448.6314) will be ignored.  Increasing output
 accuracy may allow segment to be generated.
 
 
My artwork parameter setup:
 
DEVICE-TYPE           GERBER_RS274X
OUTPUT-UNITS          INCHES
FILM-SIZE             240000 160000
FORMAT                2.5
ABORT-ON-ERROR        NO
SCALE                 1
SUPPRESS-LEAD-ZEROES  YES
SUPPRESS-TRAIL-ZEROES NO
SUPPRESS-EQUAL        YES
UNDEF-APT-CONT        NO
 
NC Drill format is 2.5
Drawing parameter accuracy is 4
 
Thank you
Van Huynh

Other related posts: