[PCB_FORUM] Re: Has anyone been able to "backrev" from version 16.0 to version 15.7?
- From: "Dharma Kemp-Bresett" <dharma@xxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Wed, 9 Jan 2008 14:42:57 -0500
Hi Gary,
Thank you. I was actually looking to find out if once a board is in version
16.0 whether or not it can be opened in 15.7 and worked on by someone else.
sorry for the lack of clarity,
Dharma
KAW/USA Ltd.
39 Simon Street, #4
Nashua, NH 03060
603-886-8711 x212
603-881-8763 fax
Confidentiality Notice: This email and any accompanying documents contain
information that is confidential, privileged or exempt from disclosure under
applicable law and is intended for the exclusive use of the addressee. This
information is private and protected by law. If you are not the intended
recipient, or have received this email in error, you are hereby notified
that any disclosure, copying, distribution or use of the contents of this
document in any manner is strictly prohibited.
_____
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Macindoe, Gary
Sent: Wednesday, January 09, 2008 2:01 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Has anyone been able to "backrev" from version 16.0
to version 15.7?
Dharma,
Below is a post I saved from Michael Catrambone.
I think this is what you are looking for. I haven't tried it myself, I still
just have 15.5.1 loaded.
Good luck
Gary E. MacIndoe
PCB Design Engineer
Fort Collins, Colorado
amd.com
gary.macindoe@xxxxxxx
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Michael Catrambone
Sent: Thursday, November 15, 2007 12:07 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Switching between two versions of Allegro PCB
Importance: High
Hey Gary,
I have had great success using the Cadence Switch Release executable which
has been part of the standard Cadence install for some time now <Install
Dir>\tools\bin\switchversion.exe). This will list all the Allegro releases
at the time of installation and you simply select the release and click OK.
I have 15.5.1, 15.7 and 16.0 loaded on the same PC and I execute the Cadence
Switch Release executable from the last loaded release and select the lower
version you would like to run.
The only thing that I have to worry about is the location of the PCBENV
directory for each of the releases which can be easily controlled by
re-targeting your HOME directory to a different location.
New to SPB 16.0, is a new Windows environmental variable
(ALLEGRO_PCBENV) that gives the ability to re-target your PCBENV directory
to a different location without having to change you HOME directory.
Hope this helps,
Michael Catrambone
UTStarcom, Inc.
-----Original Message-----
_____
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Dharma Kemp-Bresett
Sent: Wednesday, January 09, 2008 10:20 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Has anyone been able to "backrev" from version 16.0 to
version 15.7?
Hi Everyone,
I thought I had seen somewhere that it was possible to take a board done in
16.0 back to 15.7 but now I am not finding any info on that...has anyone
been able to accomplish this?
Thanks in advance,
Dharma
KAW/USA Ltd.
39 Simon Street, #4
Nashua, NH 03060
603-886-8711 x212
603-881-8763 fax
Confidentiality Notice: This email and any accompanying documents contain
information that is confidential, privileged or exempt from disclosure under
applicable law and is intended for the exclusive use of the addressee. This
information is private and protected by law. If you are not the intended
recipient, or have received this email in error, you are hereby notified
that any disclosure, copying, distribution or use of the contents of this
document in any manner is strictly prohibited.
Other related posts:
