[PCB_FORUM] Re: Hardware requirement for Allegro 16.2

Hi Nagaraj,
 
Thanks for the reply. We did not buy Allegro 16.2 yet and want to make the purchase order together with the PC update expenses if hardware really need upgradation.
 
Would you be able to write me down the minimum hardware requirement? Please advice.
 
 
Regards,
Ali.

--- On Mon, 5/18/09, Shanmugam, Nagaraj <nshanmug@xxxxxxxxx> wrote:

From: Shanmugam, Nagaraj <nshanmug@xxxxxxxxx>
Subject: [PCB_FORUM] Re: Hardware requirement for Allegro 16.2
To: icu-pcb-forum@xxxxxxxxxxxxx
Date: Monday, May 18, 2009, 2:07 AM

Dear Ali,
 
You can get the system requirement document in the installation CD - disk 1 (Disk1\Documents\pcbsystemreqs.pdf.
these documents will list the minimum requirements needed, also the RAM capacity calculation based on file size( correspond to board complexity).
 
Good Luck!!
Nagaraj Shanmugam | Lead Designer - PCB Development
nshanmug@xxxxxxxxx | Plot No:14, Sector-32, Gurgaon. | Haryana-122001 INDIA.
Direct +91 124 4340 711 | Fax +91 124 4340 555.
 



From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Ali
Sent: Monday, May 18, 2009 10:45 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Hardware requirement for Allegro 16.2

Hi Group,
 
Does any body know the hardware/PC requirement for Allegro 16.2? Is there any authenticated link/website so I can forward to my manager? I am using Microsoft Windows XP.
 
Thanks for the help.
 
Regards,
Ali



Other related posts: