[PCB_FORUM] Re: Hardware requirement for Allegro 16.2
- From: "Shanmugam, Nagaraj" <nshanmug@xxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Mon, 18 May 2009 11:37:14 +0530
Dear Ali,
You can get the system requirement document in the installation CD -
disk 1 (Disk1\Documents\pcbsystemreqs.pdf.
these documents will list the minimum requirements needed, also the RAM
capacity calculation based on file size( correspond to board
complexity).
Good Luck!!
Nagaraj Shanmugam | Lead Designer - PCB Development
nshanmug@xxxxxxxxx <blocked::mailto:nshanmug@xxxxxxxxx> | Plot No:14,
Sector-32, Gurgaon. | Haryana-122001 INDIA.
Direct +91 124 4340 711 | Fax +91 124 4340 555.
________________________________
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Ali
Sent: Monday, May 18, 2009 10:45 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Hardware requirement for Allegro 16.2
Hi Group,
Does any body know the hardware/PC requirement for Allegro 16.2? Is
there any authenticated link/website so I can forward to my manager? I
am using Microsoft Windows XP.
Thanks for the help.
Regards,
Ali
Other related posts: