[PCB_FORUM] Re: Gerbers to placement file

Hi Mitch,
At this point we are just trying to find out what our options are..... In
other words "How doable is this?"  So far I have seen some great suggestions
both here and elsewhere...some particularly time consuming, some
particularly expensive but all welcome. After all the best decision is a
well informed one.....
Thanks,
Dharma 


KAW/USA Ltd. 
39 Simon Street, #4 
Nashua, NH 03060 
603-886-8711 x212 
603-881-8763 fax 

Confidentiality Notice: This email and any accompanying documents contain
information that is confidential, privileged or exempt from disclosure under
applicable law and is intended for the exclusive use of the addressee. This
information is private and protected by law. If you are not the intended
recipient, or have received this email in error, you are hereby notified
that any disclosure, copying, distribution or use of the contents of this
document in any manner is strictly prohibited.


-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Mitch S. Morey
Sent: Friday, July 13, 2007 2:07 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Gerbers to placement file

Dharma,

I hope you've given your customer a premilinary quote for this task. I can
forsee this turning into a HUGE job, and the customer might be floored when
he/she gets the final bill. To read in the gerbers, make dummy symbols for
any parts you might not have, place symols, etc. could be a couple weeks to
get right. Do you have an assembly print to look at? How would you determine
the difference between 3 - 2 pin headers, and 1 - 2x6 pin header, for
instance? Bit, if you're getting time-n-material for this job, could be a
money maker... But, I don't think it will be (just my opinion).

Good day.
Mitch

> Hi Jerry,
> No flame here... We have a customer who is asking this of us and we 
> are trying to find the best solution. Therefore I am looking for ALL 
> possible solutions.... if allegro does the trick then so be it. If its 
> gerbtool or gcprevue or valor that works too. :-) Dharma
>
> KAW/USA Ltd.
> 39 Simon Street, #4
> Nashua, NH 03060
> 603-886-8711 x212
> 603-881-8763 fax


-----------------------------------------
Stay ahead of the information curve.
Receive PCB news and jobs on your desktop daily.
Subscribe today to the PCB CafeNews newsletter.
[ http://www10.pcbcafe.com/nl/newsletter_subscribe.php ] It's informative
and essential.
This message was sent to you from a machine at 129.46.21.121
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------


-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: