[PCB_FORUM] Re: Flash Symbol
- From: Shahed.Safavi-Bayat@xxxxxxxxxxxxxxxxxxxxx
- To: icu-pcb-forum@xxxxxxxxxxxxx
- Date: Wed, 22 Jul 2009 16:12:50 -0400
Oblong pad is available in 15.7 and up. Neither of previous emails
mentioned which version of Allegro is.
Shahed
|------------>
| From: |
|------------>
>--------------------------------------------------------------------------------------------------------------------------------------------------|
|davidkel <davidkel@xxxxxxxxx>
|
>--------------------------------------------------------------------------------------------------------------------------------------------------|
|------------>
| To: |
|------------>
>--------------------------------------------------------------------------------------------------------------------------------------------------|
|<icu-pcb-forum@xxxxxxxxxxxxx>
|
>--------------------------------------------------------------------------------------------------------------------------------------------------|
|------------>
| Date: |
|------------>
>--------------------------------------------------------------------------------------------------------------------------------------------------|
|07/22/2009 04:09 PM
|
>--------------------------------------------------------------------------------------------------------------------------------------------------|
|------------>
| Subject: |
|------------>
>--------------------------------------------------------------------------------------------------------------------------------------------------|
|[PCB_FORUM] Re: Flash Symbol
|
>--------------------------------------------------------------------------------------------------------------------------------------------------|
Hi
Maybe I missed something here. But you can make an oblong pad by specifying
the height
And width and the tool makes the pad for you. Why do you need to make the
shape?
Dave
On 7/22/09 2:07 PM, "Dharma Kemp-Bresett" <dharma@xxxxxxx> wrote:
Hi Shirley,
I agree but unless I just don't know about it this is the only
option we have for now.... Anybody willing/able to prove me wrong I
would be VERY happy to hear it. As would Shirley, I am assuming...
:-)
Thanks,
Dharma
KAW/USA Ltd.
39 Simon Street, #4
Nashua, NH 03060
603-886-8711 x212
603-881-8763 fax
Confidentiality Notice: This email and any accompanying documents
contain information that is confidential, privileged or exempt from
disclosure under applicable law and is intended for the exclusive use
of the addressee. This information is private and protected by law.
If you are not the intended recipient, or have received this email in
error, you are hereby notified that any disclosure, copying,
distribution or use of the contents of this document in any manner is
strictly prohibited.
From: Bradley, Shirley [mailto:shirley.bradley@xxxxxxxxxxxx]
Sent: Wednesday, July 22, 2009 4:00 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Flash Symbol
This is similar to what I did. Made it for the smallest dimension,
pulled it apart for the long dimension and stretched the sides. If
Cadence made it easy to make a round flash and it is easy to make an
oval pad, they should have an easy way to make the oval flash.
Thanks for your answer.
Shirley M. Bradley
Intermec
tel: 319.369.3328
shirley.bradley@xxxxxxxxxxxx
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [
mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Dharma
Kemp-Bresett
Sent: Wednesday, July 22, 2009 2:51 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Flash Symbol
Hi Shirley,
Yes, Build a normal flash to the size of your smallest dimension then
open it as a symbol .dra and then separate the two "sides" and
stretch (extend) the long sides by the difference between your
shortest and longest dimensions. If this "quick and dirty" response
is confusing to you ( and I admit it might be) reply to me offline
and I can give you more detailed info.
Thanks,
Dharma
KAW/USA Ltd.
39 Simon Street, #4
Nashua, NH 03060
603-886-8711 x212
603-881-8763 fax
Confidentiality Notice: This email and any accompanying documents
contain information that is confidential, privileged or exempt from
disclosure under applicable law and is intended for the exclusive use
of the addressee. This information is private and protected by law.
If you are not the intended recipient, or have received this email in
error, you are hereby notified that any disclosure, copying,
distribution or use of the contents of this document in any manner is
strictly prohibited.
From: Bradley, Shirley [mailto:shirley.bradley@xxxxxxxxxxxx]
Sent: Wednesday, July 22, 2009 3:43 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Flash Symbol
Greetings,
Is there an easy way to make a flash symbol for an oval plated hole?
Thanks,
Shirley M. Bradley
Intermec
tel: 319.369.3328
shirley.bradley@xxxxxxxxxxxx
This message is intended only for the named recipient. If you are not
the intended recipient, you are notified that disclosing, copying,
distributing or taking any action based on the contents of this
information is strictly prohibited.
This message is intended only for the named recipient. If you are not
the intended recipient, you are notified that disclosing, copying,
distributing or taking any action based on the contents of this
information is strictly prohibited.
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
Other related posts:
