[PCB_FORUM] First Article Inspection

From: "Carrow, Dennis" <dcarrow@xxxxxxxxxx>
To: <icu-pcb-forum@xxxxxxxxxxxxx>
Date: Wed, 25 Jan 2006 10:24:53 -0600

Hello Everyone,

            I'm at a new company that does its own manufacturing but it
appears they don't have an inspection group doing a first article
inspection on bare boards.  I know it should be done but I don't know what
to tell them to inspect.  The other PWB guy here wants to tell them to
inspect to IPC A-600F but that doesn't tell them what I think they need to
know.  Is there any information out there that can help me document what
they need to look for?  Thanks for any advice!

Follow-Ups:

[PCB_FORUM] Re: First Article Inspection
From: Tom Wood

[PCB_FORUM] First Article Inspection

Other related posts: