[PCB_FORUM] Re: Fabmaster

Hi,
Recall a few years ago I did use extracta.exe command to generate the
files saperately, then combine together to make 1 fabmaster file, but I
could not find the view files and the instruction associated with it,
must have gone with the old pc.. . If someone care enough to share the
view files usage with forum , appreciate it very much. But the cdc2fab
takes care of it in automated way, kind of forgotten how to do it
manually ..
 
 
CL,Ooi 




 

________________________________

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Vivekananda R K
- CTD, Chennai
Sent: Wednesday, April 27, 2005 1:18 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Fabmaster


Hi,
 
Fabmaster will convert board file in to CAD files.This kind  Cad file
can able to open in UNICAM tool.Mainly this file will be used in The
time of DFT.
 
Procedures.
 

1.      Install Fabmaster  
2.      Under Fabmaster select  CDC2FAB 
3.      Under CDC2FAB set the path by selection Configure 
4.      Extraction Tool : C:\Cadence\SPB_15.2\tools\pcb\bin\extracta.exe

5.      Script Files:       C:\Program Files\Fabmaster\cdc2fab\config\ 
6.      Output:D:\jobs\AFC\Hiq_Rel_140305\GERBER RELEASE 14MARCH\Board\ 
7.      also set the Buttons in to low or normal and click ok 
8.      File/Export Board, Select the board you want to change in to CAD
format. 
9.      It will extract netlist,Parts etc and finally it will generate
the CAD.Extension file in the specified file folder.

Regards
K.Vivek
 
 
 

        -----Original Message-----
        From: Ed Caldwell [mailto:Ed.Caldwell@xxxxxxxxxx]
        Sent: Wednesday, April 27, 2005 1:03 AM
        To: icu-pcb-forum@xxxxxxxxxxxxx
        Subject: [PCB_FORUM] Fabmaster
        
        

        Does anyone know if a Fabmaster file can be generated from
Allegro 15.2 - EMA says no. 
        Thanks,
        Ed

DISCLAIMER:
This message and any attachment(s) contained here are information that
is confidential, proprietary to HCL Technologies and its customers.
Contents may be privileged or otherwise protected by law. The
information is solely intended for the individual or the entity it is
addressed to. If you are not the intended recipient of this message, you
are not authorized to read, forward, print, retain, copy or disseminate
this message or any part of it. If you have received this e-mail in
error, please notify the sender immediately by return e-mail and delete
it from your computer

Other related posts: