[PCB_FORUM] Re: Fabmaster

Hi,
 
Fabmaster will convert board file in to CAD files.This kind  Cad file can
able to open in UNICAM tool.Mainly this file will be used in The time of
DFT.
 
Procedures.
 

1.      Install Fabmaster  
2.      Under Fabmaster select  CDC2FAB
3.      Under CDC2FAB set the path by selection Configure
4.      Extraction Tool : C:\Cadence\SPB_15.2\tools\pcb\bin\extracta.exe
5.      Script Files:       C:\Program Files\Fabmaster\cdc2fab\config\
6.      Output:D:\jobs\AFC\Hiq_Rel_140305\GERBER RELEASE 14MARCH\Board\
7.      also set the Buttons in to low or normal and click ok
8.      File/Export Board, Select the board you want to change in to CAD
format.
9.      It will extract netlist,Parts etc and finally it will generate the
CAD.Extension file in the specified file folder.

Regards
K.Vivek
 
 
 

-----Original Message-----
From: Ed Caldwell [mailto:Ed.Caldwell@xxxxxxxxxx]
Sent: Wednesday, April 27, 2005 1:03 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Fabmaster



Does anyone know if a Fabmaster file can be generated from Allegro 15.2 -
EMA says no. 
Thanks,
Ed
DISCLAIMER 
This message and any attachment(s) contained here are information that is 
confidential, proprietary to HCL Technologies 
and its customers. Contents may be privileged or otherwise protected by law. 
The information is solely intended for the 
individual or the entity it is addressed to. If you are not the intended 
recipient of this message, you are not authorized to 
read, forward, print, retain, copy or disseminate this message or any part of 
it. If you have received this e-mail in error, 
please notify the sender immediately by return e-mail and delete it from your 
computer

Attachment: fab.bmp
Description: Windows bitmap

Other related posts: