[PCB_FORUM] Re: Extracting libraries from a .brd file...flash symbols?
- From: <george.h.patrick@xxxxxxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Mon, 9 Mar 2009 19:42:49 -0700
OOppssss...
That should have read "Example of what can't be created as an .FSM".
I hate it when somebody interrupts while I'm writing email :}
--
George Patrick
Tektronix, Inc.
Central Engineering, EDS Applications Support
P.O. Box 500, M/S 39-512
Beaverton, OR 97077-0001
Å 503-627-5272 (voice) Æ 503-627-5587 (fax)
http://www.tektronix.com<http://www.tektronix.com/>
http://www.pcb-designer.com<http://www.pcb-designer.com/>
"Off-Grid and Proud of it!"
________________________________
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [icu-pcb-forum-bounce@xxxxxxxxxxxxx]
On Behalf Of george.h.patrick@xxxxxxxxxxxxx [george.h.patrick@xxxxxxxxxxxxx]
Sent: Monday, March 09, 2009 12:35 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Extracting libraries from a .brd file...flash symbols?
Be aware that if you are presently using lines in your .BSM to define a annulus
or other feature that has copper in the center that the new .FSM will not work.
You have to continue to use .BSM.
An example of what can't be created as a BSM
[cid:812361219@09032009-1112]
--
George Patrick
Tektronix, Inc.
Central Engineering, EDS Applications Support
P.O. Box 500, M/S 39-512
Beaverton, OR 97077-0001
Å 503-627-5272 (voice) Æ 503-627-5587 (fax)
http://www.tektronix.com<http://www.tektronix.com/>
http://www.pcb-designer.com<http://www.pcb-designer.com/>
"Off-Grid and Proud of it!"
Other related posts: