[PCB_FORUM] Re: Express PCB to Allegro?
- From: "Jean Bratton" <jean.bratton@xxxxxxxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Sat, 9 Dec 2006 05:56:29 -0800
I never heard of that tool, but it has to output something to build the
board. Ask them what that is, and maybe you can work with it to convert
it to gerber?
________________________________
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of arimitsu seiji
Sent: Friday, December 08, 2006 11:50 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Express PCB to Allegro?
Hi Everyone,
We have recently ran into a customer that has created boards using
Express PCB. We were asked to remake this board using Allegro with
slight change. I was wondering if there was anyway to convert these
files made by Express PCB (..pcb and .sch) to files that we can use by
Allegro.
Also, we asked for the gerber files, but I was informed by our customer
that Express PCB does not output gerber files.
Any help would be much appreciated.
Thank you,
Seiji
----------------------------------------------------------- To
subscribe/unsubscribe: Send a message to
icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or
unsubscribe To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/ Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
Other related posts:
