[PCB_FORUM] Re: Exporting and Importing of SI Models

Aries ,

The topology files do not have the si modeles in them they are just electrical rules and scheduling for nets/xnetx, the model are stored in the device.dml file, if you go to analize >si/emi sim >models, and select auto setup , most of the discrete will be auomaticaly assigned from the cadence default, you can also dump the models from a brd by going to analize >si/emi sim >model dump/refresh, this will create a file called board_name.dml, then you can add this to your device library in analize >si/emi sim >library, select Add existing library and browse to that file

you may still need to run analize >si/emi sim >models, and select auto setup to assign the models

hope that helps



On Jun 19, 2009, ARIES_LUMAGUE@xxxxxxxxxxx wrote:

Migs,

 

Thanks for the reply.. But can you give me some details how to do the process

 

Here is how I’m doing it now

From File with XNET

1.       in Constraint Manager

甲、    File Export à Electrical Cset

*** At this point I have an output of *.top files

 

 

In the File without XNET

1.       set up the correct path for my *.dml models, in User Preference Signal_Analysis Folder à signal_install_dir

2.       in Constraint Manager

甲、    File Import à Electrical Cset

*** I have selected the *.top file previously generated

 

Then check my nets.. But still they are not converted to XNET

I’m using Allegro v15.7

 

 

Thanks

 

 

 

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of O Migs
Sent: Friday, June 19, 2009 11:06 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Exporting and Importing of SI Models

 

Aries,

All you need is the *.top(topolgy model) and the *.dml(ibis models).     Also make sure you are pointed to the same SI libraries.

Regards,

-oscar

oscar miguelino


On Thu, Jun 18, 2009 at 6:41 PM, <ARIES_LUMAGUE@xxxxxxxxxxx> wrote:

Dear ALL,

Anyone knows how to merge or export/import SI Models from one board file to another? (Having the same board file but just different revision)

Or I just need to re-setup everything in the Database Setup Advisor – SI Models


Thanks


 

----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list go to http://www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx -----------------------------------------------------------

Other related posts: