[PCB_FORUM] Re: Exporting and Importing of SI Models

Migs,

 

Thanks for the reply.. But can you give me some details how to do the process

 

Here is how I’m doing it now

From File with XNET

1.       in Constraint Manager

甲、    File Export --> Electrical Cset

*** At this point I have an output of *.top files

 

 

In the File without XNET

1.       set up the correct path for my *.dml models, in User Preference 
Signal_Analysis Folder --> signal_install_dir

2.       in Constraint Manager

甲、    File Import --> Electrical Cset

*** I have selected the *.top file previously generated

 

Then check my nets.. But still they are not converted to XNET

I’m using Allegro v15.7

 

 

Thanks

 

 

 

________________________________

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx 
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of O Migs
Sent: Friday, June 19, 2009 11:06 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Exporting and Importing of SI Models

 

Aries,

All you need is the *.top(topolgy model) and the *.dml(ibis models).     Also 
make sure you are pointed to the same SI libraries.

Regards,

-oscar

oscar miguelino




On Thu, Jun 18, 2009 at 6:41 PM, <ARIES_LUMAGUE@xxxxxxxxxxx> wrote:

Dear ALL,

Anyone knows how to merge or export/import SI Models from one board file to 
another? (Having the same board file but just different revision)

Or I just need to re-setup everything in the Database Setup Advisor – SI Models 

 

Thanks

Other related posts: