[PCB_FORUM] Re: Export / Down Rev in Allegro...

George, Mitch,
 
Thanks for your replies!!!
 
I'll let you know what happens!
 
Regards,
 
PAUL
 
Paul J Gingras
KAW USA, LTD.    "Real People .... Real Solutions"
Voice: 603 886 8711 x200    Fax: 603 881 8763   Cell: 603 305 1475
Email: paul@xxxxxxx   Web: www.kaw.com <http://www.kaw.com/> 
39 Simon St. Bldg.#4    Nashua, NH 03060
 
Confidentiality Notice: This email and any accompanying documents contain
information that is confidential, privileged or exempt from disclosure under
applicable law and is intended for the exclusive use of the addressee. This
information is private and protected by law. If you are not the intended
recipient, or have received this email in error, you are hereby notified
that any disclosure, copying, distribution or use of the contents of this
document in any manner is strictly prohibited.
 

  _____  

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of
george.h.patrick@xxxxxxxxxxxxxx
Sent: Monday, April 30, 2007 11:33 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Export / Down Rev in Allegro...


Paul:
 
IIRC the techfile, placement file, and clibboard file in 13.6 is the same
format as in 14.2.  You can export everything out of 14.2 and import it back
into 13.6, but it is a major league PITA.
 
Good luck :)
 
-- 
George Patrick
Tektronix, Inc.
Central Engineering, EDS Applications Support
P.O. Box 500, M/S 39-512
Beaverton, OR 97077-0001
* 503-627-5272 (voice)     * 503-627-5587 (fax) <http://www.tektronix.com/> 
http://www.tektronix.com     <http://www.pcb-designer.com/>
http://www.pcb-designer.com
 
"Off-Grid and Proud of it!"

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Paul Gingras
Sent: Wednesday, April 25, 2007 13:36
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Export / Down Rev in Allegro...


Hello All,
 
Let me 1st apologize because I think this was discussed not to long ago ..
but I need to ask once again.
 
I would like to either Down Rev or File Export an Allegro DB from Allegro
14.2 to Allegro 13.6 ... Can this be done? if so  the procedure please.
 
Thanks and again sorry for the duplication.
 
Regards,
 
PAUL
 
Paul J Gingras
KAW USA, LTD.    "Real People .... Real Solutions"
Voice: 603 886 8711 x200    Fax: 603 881 8763   Cell: 603 305 1475
Email: paul@xxxxxxx   Web: www.kaw.com <http://www.kaw.com/> 
39 Simon St. Bldg.#4    Nashua, NH 03060
 
Confidentiality Notice: This email and any accompanying documents contain
information that is confidential, privileged or exempt from disclosure under
applicable law and is intended for the exclusive use of the addressee. This
information is private and protected by law. If you are not the intended
recipient, or have received this email in error, you are hereby notified
that any disclosure, copying, distribution or use of the contents of this
document in any manner is strictly prohibited.

Other related posts: