[PCB_FORUM] Export / Down Rev in Allegro...

Hello All,
 
Let me 1st apologize because I think this was discussed not to long ago ..
but I need to ask once again.
 
I would like to either Down Rev or File Export an Allegro DB from Allegro
14.2 to Allegro 13.6 ... Can this be done? if so  the procedure please.
 
Thanks and again sorry for the duplication.
 
Regards,
 
PAUL
 
Paul J Gingras
KAW USA, LTD.    "Real People .... Real Solutions"
Voice: 603 886 8711 x200    Fax: 603 881 8763   Cell: 603 305 1475
Email: paul@xxxxxxx   Web: www.kaw.com <http://www.kaw.com/> 
39 Simon St. Bldg.#4    Nashua, NH 03060
 
Confidentiality Notice: This email and any accompanying documents contain
information that is confidential, privileged or exempt from disclosure under
applicable law and is intended for the exclusive use of the addressee. This
information is private and protected by law. If you are not the intended
recipient, or have received this email in error, you are hereby notified
that any disclosure, copying, distribution or use of the contents of this
document in any manner is strictly prohibited.

Other related posts: