[PCB_FORUM] Re: ET Marking
- From: "Schwartz, Jerome" <jschwa01@xxxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Wed, 22 Sep 2010 10:31:17 -0400
DC,
I searched active and inactive specifications for 652 and could not find
anything. I could be my subscription.
We specify IPC-6012C-2010 for test.
Jerry
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Carrow, Dennis
Sent: Wednesday, September 22, 2010 10:13 AM
To: 'icu-pcb-forum@xxxxxxxxxxxxx'
Subject: [PCB_FORUM] ET Marking
I'm guilty of calling out IPC-ET-652 on our fab drawing without having a
copy to reference. Does this document state that the tested board must
be marked after testing? Sorry if this is off our normal Cadence
topics! Thanks! -DC
Other related posts:
