[PCB_FORUM] E- *Error* fprintf: argument #1 should be an I/O port (type template = "ptg") -
- From: "arimitsu seiji" <arimitsus@xxxxxxxxxxx>
- To: icu-pcb-forum@xxxxxxxxxxxxx
- Date: Mon, 12 Feb 2007 14:33:06 -0800
In addition to netlength.il there
are other skill files that comes up with the same error. It seems to
me that it is mostly for those skill files that requires a form to be
created. I have tried all the things mentioned above, but I am still
unable to get many of the skill files to work. Does anyone have the
same problems or solution?
From: "arimitsu seiji" <arimitsus@xxxxxxxxxxx>
Reply-To:
icu-pcb-forum@xxxxxxxxxxxxx
To:
icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Question
regarding the netlength.il skill file
Date: Mon, 12 Feb 2007
13:28:39 -0800
Is there a fixed .il file for the netlength.il also?
From: "vince fornier"
<kerchunk@xxxxxxxxxx>
Reply-To: icu-pcb-forum@xxxxxxxxxxxxx
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM]
Re: Question regarding the netlength.il skill
file
Date: Mon, 12 Feb 2007 00:24:58 -0500
(EST)
>
> > The permanent solution would be for someone
to update the
> > routine to handle temporary output files in the
more-or-less
> > standard way of creating them in the cwd then
deleting them
> > when done.
>
>I guess that someone
would be me.
>
>Go to
http://edawizardry.virtual.vps-host.net/resume_chris.jsp
>and at the
bottom of the page you'll see a link to the updated code. Give it a try and
if it does indeed solve your problem I'll submit it to Cadence to update
the shareware list.
>
>
>HTH,
>Chris
Walters
>local Cadence guru
>()
>
>PS - anyone know
of any positions for a(nother) Cadence
guru?
>
>_______________________________________________
>Join
Excite! - http://www.excite.com
>The most personalized portal on the
Web!
>
>
>-----------------------------------------------------------
>To
subscribe/unsubscribe:
>Send a message to
icu-pcb-forum-request@xxxxxxxxxxxxx
>with a subject of subscribe or
unsubscribe
>
>To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/
>
>Problems or
Questions:
>Send an email to
icu-pcb-forum-admins@xxxxxxxxxxxxx
>-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe: Send a message to
icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or
unsubscribe To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/ Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to http://www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
- References:
- [PCB_FORUM] Re: Question regarding the netlength.il skill file
- From: arimitsu seiji
Other related posts:
- » [PCB_FORUM] E- *Error* fprintf: argument #1 should be an I/O port (type template = "ptg") -
In addition to netlength.il there
are other skill files that comes up with the same error. It seems to
me that it is mostly for those skill files that requires a form to be
created. I have tried all the things mentioned above, but I am still
unable to get many of the skill files to work. Does anyone have the
same problems or solution?
From: "arimitsu seiji" <arimitsus@xxxxxxxxxxx>
Reply-To: icu-pcb-forum@xxxxxxxxxxxxx
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Question regarding the netlength.il skill file
Date: Mon, 12 Feb 2007 13:28:39 -0800
----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list go to http://www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx -----------------------------------------------------------Is there a fixed .il file for the netlength.il also?
From: "vince fornier" <kerchunk@xxxxxxxxxx>
Reply-To: icu-pcb-forum@xxxxxxxxxxxxx
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Question regarding the netlength.il skill file
Date: Mon, 12 Feb 2007 00:24:58 -0500 (EST)
>
> > The permanent solution would be for someone to update the
> > routine to handle temporary output files in the more-or-less
> > standard way of creating them in the cwd then deleting them
> > when done.
>
>I guess that someone would be me.
>
>Go to http://edawizardry.virtual.vps-host.net/resume_chris.jsp
>and at the bottom of the page you'll see a link to the updated code. Give it a try and if it does indeed solve your problem I'll submit it to Cadence to update the shareware list.
>
>
>HTH,
>Chris Walters
>local Cadence guru
>()
>
>PS - anyone know of any positions for a(nother) Cadence guru?
>
>_______________________________________________
>Join Excite! - http://www.excite.com
>The most personalized portal on the Web!
>
>
>-----------------------------------------------------------
>To subscribe/unsubscribe:
>Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
>with a subject of subscribe or unsubscribe
>
>To view the archives of this list go to http://www.freelists.org/archives/icu-pcb-forum/
>
>Problems or Questions:
>Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
>-----------------------------------------------------------
- [PCB_FORUM] Re: Question regarding the netlength.il skill file
- From: arimitsu seiji