[PCB_FORUM] Dynamic shape void to Mechanical symbol NPTH
- From: Jim Goshorn <jgoshorn@xxxxxxx>
- To: icu-pcb-forum@xxxxxxxxxxxxx
- Date: Mon, 12 Dec 2005 16:36:49 -0600
In 15.2 Studio, I am having a problem with a NPTH to dynamic shape.
The shape is looking at the hole as if it were part of the NO_TYPE group
in a high voltage area on the board where no_type has a large DRC spacing.
I am not sure how to append or what to append to the mechanical symbol
to reduce the clearance. Has anyone run into this type of situation ?
Jim Goshorn
Other related posts:
- » [PCB_FORUM] Dynamic shape void to Mechanical symbol NPTH
- » [PCB_FORUM] Re: Dynamic shape void to Mechanical symbol NPTH
In 15.2 Studio, I am having a problem with a NPTH to dynamic shape. The shape is looking at the hole as if it were part of the NO_TYPE group in a high voltage area on the board where no_type has a large DRC spacing. I am not sure how to append or what to append to the mechanical symbol to reduce the clearance. Has anyone run into this type of situation ?