[PCB_FORUM] Re: Dynamic shape status report strangeness...solved

For some reason, when I created the shape it didn't really "make" the shape
(right layer etc. was selected).  I displayed "boundary" and that let me
select these rogue shapes, and delete them.  Strange, but now problem
solved.

Regards,

Austin


> -----Original Message-----
> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Austin Franklin
> Sent: Monday, June 15, 2009 10:11 AM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Dynamic shape status report strangeness...
>
>
> Hi,
>
> I do a dynamic shape status report and get the following:
>
> Layer = TOP
>      State: Smooth       Point on shape: (3906.48 1121.76) Net: VDD_3-3
>      State: No Etch      Point on shape: (3808.08 1313.64) Net: Dummy Net
>      State: No Etch      Point on shape: (3808.08 1269.36) Net: Dummy Net
>      State: No Etch      Point on shape: (3867.12 1269.36) Net: Dummy Net
>      State: No Etch      Point on shape: (3857.28 1259.52) Net: Dummy Net
>      State: Smooth       Point on shape: (3808.08 1220.16) Net: VDD_3-3
>
> But, the problem is, there is no shape at the points where it says "No
> Etch".  Anyone have any idea how to get rid of these?
>
> I'm on 15.7.
>
> Regards,
>
> Austin
> -----------------------------------------------------------
> To subscribe/unsubscribe:
> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> with a subject of subscribe or unsubscribe
>
> To view the archives of this list go to
> http://www.freelists.org/archives/icu-pcb-forum/
>
> Problems or Questions:
> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> -----------------------------------------------------------
>
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: