[PCB_FORUM] Re: Dynamic shape status report strangeness...

Hi Andrew,

You are correct, that is exactly how I solved it!

Regards,

Austin


> -----Original Message-----
> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Andrew Noonan
> (annoonan)
> Sent: Monday, June 15, 2009 4:45 PM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Re: Dynamic shape status report strangeness...
> 
> 
> Austin,
> Turn on the 'BOUNDARY' layer in the 'stackup' section of color dialog
> window. They will probably show up there. Delete those and those should
> go away.
> Andrew
> 
> -----Original Message-----
> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Austin Franklin
> Sent: Monday, June 15, 2009 7:11 AM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Dynamic shape status report strangeness...
> 
> Hi,
> 
> I do a dynamic shape status report and get the following:
> 
> Layer = TOP
>      State: Smooth       Point on shape: (3906.48 1121.76) Net: VDD_3-3
>      State: No Etch      Point on shape: (3808.08 1313.64) Net: Dummy
> Net
>      State: No Etch      Point on shape: (3808.08 1269.36) Net: Dummy
> Net
>      State: No Etch      Point on shape: (3867.12 1269.36) Net: Dummy
> Net
>      State: No Etch      Point on shape: (3857.28 1259.52) Net: Dummy
> Net
>      State: Smooth       Point on shape: (3808.08 1220.16) Net: VDD_3-3
> 
> But, the problem is, there is no shape at the points where it says "No
> Etch".  Anyone have any idea how to get rid of these?
> 
> I'm on 15.7.
> 
> Regards,
> 
> Austin
> -----------------------------------------------------------
> To subscribe/unsubscribe: 
> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> with a subject of subscribe or unsubscribe
> 
> To view the archives of this list go to
> http://www.freelists.org/archives/icu-pcb-forum/
> 
> Problems or Questions:
> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> -----------------------------------------------------------
> -----------------------------------------------------------
> To subscribe/unsubscribe: 
> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> with a subject of subscribe or unsubscribe
> 
> To view the archives of this list go to 
> http://www.freelists.org/archives/icu-pcb-forum/
> 
> Problems or Questions:
> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> -----------------------------------------------------------
> 
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: