If you go into your home directory pcbenv you will find a file allegro.geo. This is the file you are looking for. Once you have the screen where you want it, make this file read only so it won¹t change. Dave On 7/21/10 8:05 AM, "Dave Seymour" <dseymour@xxxxxxxxxxx> wrote: > I can¹t figure out the pattern of when it opens up on a particular monitor. > > The ³hitting the X² after enlarging to full screen did not work on my set up. > > However, bringing allegro to the right monitor, as a minimum screen (opened > allegro, but not full screen), and then ³hitting the X² and shutting down; Did > produce the desired effect. > > The next time I opened Allegro, it opened on the right screen. > > This tells me that somewhere in the system there is a file that dictates where > Allegro will open. > > I¹m just curious if that file could be controlled in a script when opening up > Allegro to always have it open on the right monitor. > > Thanks for the tips. > Dave > > > > > > > Dave Seymour > Ixia > www.ixiacom.com <http://www.ixiacom.com> > 919.267.4840 > > > From: icu-pcb-forum-bounce@xxxxxxxxxxxxx > [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of TEYSSIER Jean-Charles > Sent: Wednesday, July 21, 2010 9:57 AM > To: icu-pcb-forum@xxxxxxxxxxxxx > Subject: [PCB_FORUM] Re: Dual Monitor Setup > > Why full size ??? > > > Jean-Charles TEYSSIER > Responsable d¹affaire > Adeneo > Adetel Group > 2, chemin du Ruisseau > 69134 ECULLY - FRANCE > Tél:+33(0)4 26 49 04 09-Fax:+33(0)4 72 86 05 39 > www.adetelgroup.com <http://www.adetelgroup.com/> > P Before printing, think about ENVIRONMENTAL responsibility! > > > De : icu-pcb-forum-bounce@xxxxxxxxxxxxx > [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] De la part de Carrow, Dennis > Envoyé : mercredi 21 juillet 2010 15:55 > À : 'icu-pcb-forum@xxxxxxxxxxxxx' > Objet : [PCB_FORUM] Re: Dual Monitor Setup > > Open allegro, move the screen shot to the monitor you wish it to open on, > enlarge screen shot to full size, and exit the program by hitting the X in the > upper right of the screen. Next time you open the program it will be on that > monitor. > > > > From: icu-pcb-forum-bounce@xxxxxxxxxxxxx > [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Reade, Sue > Sent: Wednesday, July 21, 2010 8:48 AM > To: icu-pcb-forum@xxxxxxxxxxxxx > Subject: [PCB_FORUM] Re: Dual Monitor Setup > > It seems to always open up where I closed it last. I¹m not sure that there is > anything for a specific application that would direct it to a specific > monitor. > > > Sue Reade > CAD Engineer, Hardware Engineering, NSG > (o) +1.919.461-1047 | (m) +1.919.819-8092 > > > From: icu-pcb-forum-bounce@xxxxxxxxxxxxx > [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Dave Seymour > Sent: Wednesday, July 21, 2010 9:44 AM > To: icu-pcb-forum@xxxxxxxxxxxxx > Subject: [PCB_FORUM] Dual Monitor Setup > > Hey Everybody, > > I got a dual monitor set up for Allegro. > > I would like Allegro to always open on the right monitor, the left being my > main monitor. > > What controls which monitor Allegro opens on? > > Thanks > Dave > > > > Dave Seymour > Ixia > www.ixiacom.com <http://www.ixiacom.com> > 919.267.4840 > > >> >