[PCB_FORUM] Re: Drill Legend probs

I'm thinking 2.4 is the drill size, and that you have some 2.4 drills
with one figure and some with another...???

 

________________________________

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Macindoe, Gary
Sent: Monday, April 09, 2007 4:32 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Drill Legend probs

 

Hey guys,

 

I'm trying to help a fellow designer in our company (remotely). I have a
copy of his database, it's setup as Metric.

 

15.5.1, XP Pro.

 

When running Manufacture -> NC -> Drill Legend, it fails with the
following message:

 

>>> Begin processing drill holes.

>>> Warning : Hole 2.4000-0.0000-C-N-0.0000-0.0000 uses multiple drill
figures.

>>> End processing drill holes.

 

To me it looked like "2.4000-0.0000" were coordinates, but there is no
hole there.

I've not seen this one, but I have had two different padstacks with the
same drill figure, which runs fine.

 

Any ideas as to how to find the offending hole?

 

Thanks,

 

Gary

 

 

  

 

Gary E. MacIndoe

PCB Design Engineer

Longmont, Colorado

 

amd.com

gary.macindoe@xxxxxxx

GIF image

Other related posts: