[PCB_FORUM] Re: Drill Legend probs

Look at the drill table.

Somewhere, there are the same hole size with
different drill figures.

Example:

.012 = A
.012 = B


Different pad padstacks with the same hole and same figure
are fine. This is same hole with different figures.

Dave


Macindoe, Gary wrote:

Hey guys,

 

I’m trying to help a fellow designer in our company (remotely). I have a copy of his database, it’s setup as Metric.

 

15.5.1, XP Pro.

 

When running Manufacture -> NC -> Drill Legend, it fails with the following message:

 

>>> Begin processing drill holes.

>>> Warning : Hole 2.4000-0.0000-C-N-0.0000-0.0000 uses multiple drill figures.

>>> End processing drill holes.

 

To me it looked like “2.4000-0.0000” were coordinates, but there is no hole there.

I’ve not seen this one, but I have had two different padstacks with the same drill figure, which runs fine.

 

Any ideas as to how to find the offending hole?

 

Thanks,

 

Gary

 

 

 

 

Gary E. MacIndoe

PCB Design Engineer

Longmont, Colorado

 

amd.com

gary.macindoe@xxxxxxx

 

 

 

 


-- 
Dave Seymour, CID+
Catapult Communications Inc.
800 Perimeter Park Dr, Suite A
Morrisville, NC 27560

Direct: (919)653-4249
Main: (919)653-4180
Fax: (919)653-4297

Dave.seymour@xxxxxxxxxxxx

Other related posts: