[PCB_FORUM] Re: Disconnected vias from planes - different problem

Hi Austin,
 
 This list is monitored also. I watch the Allegro issues and I don't see 
 much traffic here since the second forum was created. Also, to be fair 
 to everyone on it, we at Cadence expect other forum members to respond 
 first and then we add our 2 cents if there is a clear need. 
 
 -Regards,
 Barbara Seeger - Cadence
 

> Hi Linda,
> 
> > Please post this note to the PCB forum on the Cadence user community at
> > www.cdnusers.org.  Cadence engineers monitor that site and will be able
> > to both see this issue you are raising, and respond. 
> 
> Why don't they monitor *this* email list as well?
> 
> Regards,
> 
> Austin
> -----------------------------------------------------------
> To subscribe/unsubscribe: 
> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> with a subject of subscribe or unsubscribe
> 
> To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/
> 
> Problems or Questions:
> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> -----------------------------------------------------------

-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: