[PCB_FORUM] Re: Disappearing cursor SOLVED?

Hi Everyone,
I now have my cursor again, yeah! I saved the board file in a different
location to do a refresh and immediately got my cursor back. So it looks
like there is something in my directory structure causing the issue. So, not
solved, but worked around? If I find out anything more definitive about the
actual cause I will post for everyone and if anyone else already knows the
true cause I will be eagerly awaiting your reply. :-)
Thanks,
Dharma


KAW/USA Ltd. 
39 Simon Street, #4 
Nashua, NH 03060 
603-886-8711 x212 
603-881-8763 fax 

Confidentiality Notice: This email and any accompanying documents contain
information that is confidential, privileged or exempt from disclosure under
applicable law and is intended for the exclusive use of the addressee. This
information is private and protected by law. If you are not the intended
recipient, or have received this email in error, you are hereby notified
that any disclosure, copying, distribution or use of the contents of this
document in any manner is strictly prohibited.


-----Original Message-----
From: Dharma Kemp-Bresett [mailto:dharma@xxxxxxx] 
Sent: Wednesday, April 29, 2009 10:18 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Disappearing cursor

Hi everyone,
 I am having an issue I cant seem to figure out. I have my cursor set to
infinite and up until a couple days ago I had no problems but now, for some
reason the cursor is gone and I cant get it back. At first it was an
intermittent problem... I would be working and the cursor would suddenly not
be there! I could reopen the brd file and my cursor would come back but now
no matter what I do I cant seem to get it back. I have double and triple
checked the preferences and display colors and everything looks ok. I have
even tried switching from infinite to cross but to no avail. The one odd
thing is that around the same time this started, in my color and visibility,
one of the whites changed to black. But, even after changing the palette so
I have two whites again I still cannot get it back! This is also only
happening with this particular brd file, if I open an earlier version or a
different brd I am fine again. I am hoping someone out there has seen this
before and can help me. I am also hoping its user error and I am just not
seeing the solution as I have come way to far with this board to have to go
back to a version without the problem.
Thanks,
Dharma 

KAW/USA Ltd. 
39 Simon Street, #4
Nashua, NH 03060
603-886-8711 x212
603-881-8763 fax 

Confidentiality Notice: This email and any accompanying documents contain
information that is confidential, privileged or exempt from disclosure under
applicable law and is intended for the exclusive use of the addressee. This
information is private and protected by law. If you are not the intended
recipient, or have received this email in error, you are hereby notified
that any disclosure, copying, distribution or use of the contents of this
document in any manner is strictly prohibited.



-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------


-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: