Thanks for the ideas Doug, but couldn't find the details on that one. -----Original Message----- From: Douglas Stanley [mailto:dstanley@xxxxxxxxxxxx] Sent: Wednesday, August 25, 2004 11:23 AM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: Dialog box elements All of these popup are just forms right? They can be found in the 'share/pcb/text/forms directory'. I know this doesn't solve the root problem, but you can edit these form definitions yourself. I have edited the artwork control form in the past to allow for easier reading. I don't have 15.X (don't ask - it's a long story), so I can't tell you what this particular form is called. But I'm sure you could edit the size of the "Minumum/Maximum Connects" fields to make it longer. Make sure you make a backup of the form, because when you upgrade your Allegro, these forms get overwritten. Douglas G. Stanley Broadcom Corporation - www.broadcom.com (949) 926-5889 - voice dstanley@xxxxxxxxxxxx -----Original Message----- From: Andrew Noonan [mailto:andrew@xxxxxxxxxxx] Sent: Wednesday, August 25, 2004 9:57 AM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Dialog box elements I'm really impressed with the amount of work that has gone into the latest version of Allegro. But can Cadence do something about these 'up-down' scroll boxes, please? Way too often when you need to see the numerical value in a one or two digit box, you can't; at least, not clearly (see Minimum connects, Maximum connects). This behavior is not limited to this dialog box either. I have tried different system font sizes and screen resolutions, and nothing helps. Maybe I'm missing something? Andrew Noonan Topspin Communications 650-316-3398