[PCB_FORUM] Re: Dialog box elements

hi !! all
Before joining this forum i thought tht,this forum will be some and other
way usefull for my  superpowering the knowledge of hardware design.but
after seeing the first reply of this forum the things took 180 degree
phase shift.
Langguages r made to convey our feeling to other .If it is conveyed then
it really doesn't matter in what way you have written or told.
You might be surprised to know tht in our country we 've 27 different &
distinct langguages..not at all corelative.
But its okay for me if i am learning something whether it is hardware
related or cultural related..
but i really appriciate the enthusiasm of this forum..

Thanks for your valuable comment..
This mail i have typed with lots of precision..i mean the backspace &
delete key of my keyboard.. 
 

 On Thu, 26 Aug 2004, Abel, Shannon K. wrote:

> Date: Thu, 26 Aug 2004 08:41:52 -0700
> From: "Abel, Shannon K." <shannon.abel@xxxxxxx>
> Reply-To: icu-pcb-forum@xxxxxxxxxxxxx
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Re: Dialog box elements
> 
> I usually am a laid back kind of a guy, but this is really starting to get to 
> me.
> 
> Rakesh,
> Let me first apologize for these ignorant people. 
> 
> I thought this forum was to help people out? 
> 
> To all who criticized Rakesh:
> One comment truly stood out when viewing these emails and that was the 
> statement made by Mr. Friedman "...we are all educated, sophisticated 
> engineers...."  It seems to me that if you all were educated and 
> sophisticated, you wouldn't make ludicrous comments like you have been.  It 
> seems that by the way you are acting you didn't quite pass kindergarten or 
> get that memo on professionalism.  Its amazing at how truly ugly the human 
> race can be.  Just because you speak English and can complete a full written 
> English sentence, doesn't mean your above anyone else.  (But hey that's just 
> my opinion, but hey I'm not even an engineer, just a designer!) 
> 
> Lets see you write a complete and correct sentence in Rakesh's native 
> language!  Bet you couldn't.
> 
> Cut the guy some slack!  Lets keep the forum to what it was intended to, do 
> help people, not criticize them.
> 
> 
> Shannon Abel
> 
> -----Original Message-----
> From: Otey, Michael L (GE Energy) [mailto:Michael.Otey@xxxxxx]
> Sent: Thursday, August 26, 2004 11:20 AM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Re: Dialog box elements
> 
> 
> Maybe you guys should take this outside.
> 
> -----Original Message-----
> From: sjcharles@xxxxxxx [mailto:sjcharles@xxxxxxx]
> Sent: Thursday, August 26, 2004 11:13 AM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Re: Dialog box elements
> 
> 
> Jonathan
> To some of us, english isn't our first language. I've been asked to use 
> proper english by jerks like you a few times, maybe some day we can all be 
> like you. My opinion only. 
> > 
> > From: "Jonathan Friedman" <jf@xxxxxxxxxxx>
> > Date: 2004/08/26 Thu AM 01:08:36 EDT
> > To: <icu-pcb-forum@xxxxxxxxxxxxx>
> > Subject: [PCB_FORUM] Re: Dialog box elements
> > 
> > Welcome Rakesh. Hope everything is going well for you over at C-DoT. That
> > said, I would like to make general comment.
> > 
> > Not that my opinion amounts to anything, but we are all educated,
> > sophisticated engineers. Could we please not type like my 13 year-old little
> > sister and her friends.
> > 
> > Please type the two extra letters in "see", the two extra letters in "you",
> > etc (<-- always ok in my book <grin>), ad infinitum...
> > 
> > I'm not a prick, but it really goes a long way towards making communication
> > on the forum more understandable and professional. English (and E-slang
> > particularly) is not the native tongue of all of your peers here in this
> > community.
> > 
> > Regards,
> > 
> > Jonathan Friedman, GSR
> > Networked Embedded Systems Laboratory (NESL)
> > University of California, Los Angeles (UCLA)
> > 
> > -----Original Message-----
> > From: Rakesh Ranjan [mailto:rakesh_r@xxxxxxxxxxxxxx]
> > Sent: Wednesday, August 25, 2004 8:43 PM
> > To: icu-pcb-forum@xxxxxxxxxxxxx
> > Subject: [PCB_FORUM] Re: Dialog box elements
> > 
> > 
> > hi !!
> > 
> > yesterday only i joined this group,and i m really glad to c the activeness
> > of this groups.I m working in C-DoT(Centre for development of
> > telematics),INDIA.
> > fervently hoping to get the hardcore knowledge from all of u ..
> > 
> > Regards,
> > rakesh
> > 
> > 
> > 
> > 
> > 
> > 
> > 
> > On Wed, 25 Aug 2004, Andrew Noonan wrote:
> > 
> > > Date: Wed, 25 Aug 2004 16:06:18 -0700
> > > From: Andrew Noonan <andrew@xxxxxxxxxxx>
> > > Reply-To: icu-pcb-forum@xxxxxxxxxxxxx
> > > To: icu-pcb-forum@xxxxxxxxxxxxx
> > > Subject: [PCB_FORUM] Re: Dialog box elements
> > >
> > > whoops.. spoke too soon.
> > > The file dyn_xshape.form has field -  INTSLIDEBAR 1 1  (width 1 for the
> > > character and width 1 for the arrow up/down button) so I changed and
> > > INTSLIDEBAR 2 1. And 'voila' (or wallah as some like to say), I can see
> > > the numbers!
> > > Thanks Doug!
> > >
> > >
> > > -----Original Message-----
> > > From: Douglas Stanley [mailto:dstanley@xxxxxxxxxxxx]
> > > Sent: Wednesday, August 25, 2004 11:23 AM
> > > To: icu-pcb-forum@xxxxxxxxxxxxx
> > > Subject: [PCB_FORUM] Re: Dialog box elements
> > >
> > >
> > > All of these popup are just forms right? They can be found in the
> > > 'share/pcb/text/forms directory'. I know this doesn't solve the root
> > > problem, but you can edit these form definitions yourself. I have edited
> > > the artwork control form in the past to allow for easier reading.
> > >
> > > I don't have 15.X (don't ask - it's a long story), so I can't tell you
> > > what this particular form is called. But I'm sure you could edit the
> > > size of the "Minumum/Maximum Connects" fields to make it longer.
> > >
> > > Make sure you make a backup of the form, because when you upgrade your
> > > Allegro, these forms get overwritten.
> > >
> > >
> > >
> > >
> > > Douglas G. Stanley
> > > Broadcom Corporation - www.broadcom.com
> > > (949) 926-5889 - voice
> > > dstanley@xxxxxxxxxxxx
> > >
> > >
> > >
> > >
> > > -----Original Message-----
> > > From: Andrew Noonan [mailto:andrew@xxxxxxxxxxx]
> > > Sent: Wednesday, August 25, 2004 9:57 AM
> > > To: icu-pcb-forum@xxxxxxxxxxxxx
> > > Subject: [PCB_FORUM] Dialog box elements
> > >
> > >
> > > I'm really impressed with the amount of work that has gone into the
> > > latest version of Allegro.
> > > But can Cadence do something about these 'up-down' scroll boxes, please?
> > > Way too often when you need to see the numerical value in a one or two
> > > digit box, you can't; at least, not clearly (see Minimum connects,
> > > Maximum connects). This behavior is not limited to this dialog box
> > > either.
> > > I have tried different system font sizes and screen resolutions, and
> > > nothing helps.
> > > Maybe I'm missing something?
> > >
> > >
> > >
> > >
> > > Andrew Noonan
> > > Topspin Communications
> > > 650-316-3398
> > >
> > >
> > >
> > 
> > 
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > Thanks & Regards,
> > 
> > RAKESH RANJAN
> > Research Engineer,
> > Center For Development of Telematics,
> > Sneha Complex,71/1,
> > Millers Road Bangalore-560052.
> > Trin::080-3348918(r)
> > ::080-(2263399/2253483)-278/373(ext.)(O)
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > 
> > -----------------------------------------------------------
> > To subscribe/unsubscribe:
> >     Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> >     with a subject of subscribe or unsubscribe
> > 
> > To view the archives of this list please login at
> > http://www.freelists.org. Our list name is icu-pcb-forum
> > or go to http://www.freelists.org/archives/icu-pcb-forum/
> > 
> > Problems or Questions:
> >     Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> > 
> > Want to post a job listing ?  DON'T DO IT HERE!
> > Better yet, join our jobs listing forum.
> > 
> > SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
> > POST:       icu-jobs-forum@xxxxxxxxxx
> > -----------------------------------------------------------
> > 
> > -----------------------------------------------------------
> > To subscribe/unsubscribe: 
> >     Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> >     with a subject of subscribe or unsubscribe
> > 
> > To view the archives of this list please login at
> > http://www.freelists.org. Our list name is icu-pcb-forum
> > or go to http://www.freelists.org/archives/icu-pcb-forum/
> > 
> > Problems or Questions:
> >     Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> > 
> > Want to post a job listing ?  DON'T DO IT HERE!  
> > Better yet, join our jobs listing forum.
> > 
> > SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
> > POST:       icu-jobs-forum@xxxxxxxxxx
> > -----------------------------------------------------------
> > 
> 
> -----------------------------------------------------------
> To subscribe/unsubscribe: 
>       Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
>       with a subject of subscribe or unsubscribe
> 
> To view the archives of this list please login at
> http://www.freelists.org. Our list name is icu-pcb-forum
> or go to http://www.freelists.org/archives/icu-pcb-forum/
> 
> Problems or Questions:
>       Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> 
> Want to post a job listing ?  DON'T DO IT HERE!  
> Better yet, join our jobs listing forum.
> 
> SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
> POST:       icu-jobs-forum@xxxxxxxxxx
> -----------------------------------------------------------
> -----------------------------------------------------------
> To subscribe/unsubscribe: 
>       Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
>       with a subject of subscribe or unsubscribe
> 
> To view the archives of this list please login at
> http://www.freelists.org. Our list name is icu-pcb-forum
> or go to http://www.freelists.org/archives/icu-pcb-forum/
> 
> Problems or Questions:
>       Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> 
> Want to post a job listing ?  DON'T DO IT HERE!  
> Better yet, join our jobs listing forum.
> 
> SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
> POST:       icu-jobs-forum@xxxxxxxxxx
> -----------------------------------------------------------
> -----------------------------------------------------------
> To subscribe/unsubscribe: 
>       Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
>       with a subject of subscribe or unsubscribe
> 
> To view the archives of this list please login at
> http://www.freelists.org. Our list name is icu-pcb-forum
> or go to http://www.freelists.org/archives/icu-pcb-forum/
> 
> Problems or Questions:
>       Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> 
> Want to post a job listing ?  DON'T DO IT HERE!  
> Better yet, join our jobs listing forum.
> 
> SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
> POST:       icu-jobs-forum@xxxxxxxxxx
> -----------------------------------------------------------
> 


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 
Thanks & Regards,

RAKESH RANJAN 
Research Engineer,
Center For Development of Telematics,
Sneha Complex,71/1,
Millers Road Bangalore-560052.
Trin::080-3348918(r)  
::080-(2263399/2253483)-278/373(ext.)(O)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

-----------------------------------------------------------
To subscribe/unsubscribe: 
        Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
        with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum
or go to http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
        Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ?  DON'T DO IT HERE!  
Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------

Other related posts: