[PCB_FORUM] Re: Dialog box elements

I'm in Phoenix and its too hot.
> 
> From: "Otey, Michael L (GE Energy)" <Michael.Otey@xxxxxx>
> Date: 2004/08/26 Thu AM 11:20:05 EDT
> To: <icu-pcb-forum@xxxxxxxxxxxxx>
> Subject: [PCB_FORUM] Re: Dialog box elements
> 
> Maybe you guys should take this outside.
> 
> -----Original Message-----
> From: sjcharles@xxxxxxx [mailto:sjcharles@xxxxxxx]
> Sent: Thursday, August 26, 2004 11:13 AM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Re: Dialog box elements
> 
> 
> Jonathan
> To some of us, english isn't our first language. I've been asked to use 
> proper english by jerks like you a few times, maybe some day we can all be 
> like you. My opinion only. 
> > 
> > From: "Jonathan Friedman" <jf@xxxxxxxxxxx>
> > Date: 2004/08/26 Thu AM 01:08:36 EDT
> > To: <icu-pcb-forum@xxxxxxxxxxxxx>
> > Subject: [PCB_FORUM] Re: Dialog box elements
> > 
> > Welcome Rakesh. Hope everything is going well for you over at C-DoT. That
> > said, I would like to make general comment.
> > 
> > Not that my opinion amounts to anything, but we are all educated,
> > sophisticated engineers. Could we please not type like my 13 year-old little
> > sister and her friends.
> > 
> > Please type the two extra letters in "see", the two extra letters in "you",
> > etc (<-- always ok in my book <grin>), ad infinitum...
> > 
> > I'm not a prick, but it really goes a long way towards making communication
> > on the forum more understandable and professional. English (and E-slang
> > particularly) is not the native tongue of all of your peers here in this
> > community.
> > 
> > Regards,
> > 
> > Jonathan Friedman, GSR
> > Networked Embedded Systems Laboratory (NESL)
> > University of California, Los Angeles (UCLA)
> > 
> > -----Original Message-----
> > From: Rakesh Ranjan [mailto:rakesh_r@xxxxxxxxxxxxxx]
> > Sent: Wednesday, August 25, 2004 8:43 PM
> > To: icu-pcb-forum@xxxxxxxxxxxxx
> > Subject: [PCB_FORUM] Re: Dialog box elements
> > 
> > 
> > hi !!
> > 
> > yesterday only i joined this group,and i m really glad to c the activeness
> > of this groups.I m working in C-DoT(Centre for development of
> > telematics),INDIA.
> > fervently hoping to get the hardcore knowledge from all of u ..
> > 
> > Regards,
> > rakesh
> > 
> > 
> > 
> > 
> > 
> > 
> > 
> > On Wed, 25 Aug 2004, Andrew Noonan wrote:
> > 
> > > Date: Wed, 25 Aug 2004 16:06:18 -0700
> > > From: Andrew Noonan <andrew@xxxxxxxxxxx>
> > > Reply-To: icu-pcb-forum@xxxxxxxxxxxxx
> > > To: icu-pcb-forum@xxxxxxxxxxxxx
> > > Subject: [PCB_FORUM] Re: Dialog box elements
> > >
> > > whoops.. spoke too soon.
> > > The file dyn_xshape.form has field -  INTSLIDEBAR 1 1  (width 1 for the
> > > character and width 1 for the arrow up/down button) so I changed and
> > > INTSLIDEBAR 2 1. And 'voila' (or wallah as some like to say), I can see
> > > the numbers!
> > > Thanks Doug!
> > >
> > >
> > > -----Original Message-----
> > > From: Douglas Stanley [mailto:dstanley@xxxxxxxxxxxx]
> > > Sent: Wednesday, August 25, 2004 11:23 AM
> > > To: icu-pcb-forum@xxxxxxxxxxxxx
> > > Subject: [PCB_FORUM] Re: Dialog box elements
> > >
> > >
> > > All of these popup are just forms right? They can be found in the
> > > 'share/pcb/text/forms directory'. I know this doesn't solve the root
> > > problem, but you can edit these form definitions yourself. I have edited
> > > the artwork control form in the past to allow for easier reading.
> > >
> > > I don't have 15.X (don't ask - it's a long story), so I can't tell you
> > > what this particular form is called. But I'm sure you could edit the
> > > size of the "Minumum/Maximum Connects" fields to make it longer.
> > >
> > > Make sure you make a backup of the form, because when you upgrade your
> > > Allegro, these forms get overwritten.
> > >
> > >
> > >
> > >
> > > Douglas G. Stanley
> > > Broadcom Corporation - www.broadcom.com
> > > (949) 926-5889 - voice
> > > dstanley@xxxxxxxxxxxx
> > >
> > >
> > >
> > >
> > > -----Original Message-----
> > > From: Andrew Noonan [mailto:andrew@xxxxxxxxxxx]
> > > Sent: Wednesday, August 25, 2004 9:57 AM
> > > To: icu-pcb-forum@xxxxxxxxxxxxx
> > > Subject: [PCB_FORUM] Dialog box elements
> > >
> > >
> > > I'm really impressed with the amount of work that has gone into the
> > > latest version of Allegro.
> > > But can Cadence do something about these 'up-down' scroll boxes, please?
> > > Way too often when you need to see the numerical value in a one or two
> > > digit box, you can't; at least, not clearly (see Minimum connects,
> > > Maximum connects). This behavior is not limited to this dialog box
> > > either.
> > > I have tried different system font sizes and screen resolutions, and
> > > nothing helps.
> > > Maybe I'm missing something?
> > >
> > >
> > >
> > >
> > > Andrew Noonan
> > > Topspin Communications
> > > 650-316-3398
> > >
> > >
> > >
> > 
> > 
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > Thanks & Regards,
> > 
> > RAKESH RANJAN
> > Research Engineer,
> > Center For Development of Telematics,
> > Sneha Complex,71/1,
> > Millers Road Bangalore-560052.
> > Trin::080-3348918(r)
> > ::080-(2263399/2253483)-278/373(ext.)(O)
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > 
> > -----------------------------------------------------------
> > To subscribe/unsubscribe:
> >     Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> >     with a subject of subscribe or unsubscribe
> > 
> > To view the archives of this list please login at
> > http://www.freelists.org. Our list name is icu-pcb-forum
> > or go to http://www.freelists.org/archives/icu-pcb-forum/
> > 
> > Problems or Questions:
> >     Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> > 
> > Want to post a job listing ?  DON'T DO IT HERE!
> > Better yet, join our jobs listing forum.
> > 
> > SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
> > POST:       icu-jobs-forum@xxxxxxxxxx
> > -----------------------------------------------------------
> > 
> > -----------------------------------------------------------
> > To subscribe/unsubscribe: 
> >     Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> >     with a subject of subscribe or unsubscribe
> > 
> > To view the archives of this list please login at
> > http://www.freelists.org. Our list name is icu-pcb-forum
> > or go to http://www.freelists.org/archives/icu-pcb-forum/
> > 
> > Problems or Questions:
> >     Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> > 
> > Want to post a job listing ?  DON'T DO IT HERE!  
> > Better yet, join our jobs listing forum.
> > 
> > SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
> > POST:       icu-jobs-forum@xxxxxxxxxx
> > -----------------------------------------------------------
> > 
> 
> -----------------------------------------------------------
> To subscribe/unsubscribe: 
>       Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
>       with a subject of subscribe or unsubscribe
> 
> To view the archives of this list please login at
> http://www.freelists.org. Our list name is icu-pcb-forum
> or go to http://www.freelists.org/archives/icu-pcb-forum/
> 
> Problems or Questions:
>       Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> 
> Want to post a job listing ?  DON'T DO IT HERE!  
> Better yet, join our jobs listing forum.
> 
> SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
> POST:       icu-jobs-forum@xxxxxxxxxx
> -----------------------------------------------------------
> -----------------------------------------------------------
> To subscribe/unsubscribe: 
>       Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
>       with a subject of subscribe or unsubscribe
> 
> To view the archives of this list please login at
> http://www.freelists.org. Our list name is icu-pcb-forum
> or go to http://www.freelists.org/archives/icu-pcb-forum/
> 
> Problems or Questions:
>       Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> 
> Want to post a job listing ?  DON'T DO IT HERE!  
> Better yet, join our jobs listing forum.
> 
> SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
> POST:       icu-jobs-forum@xxxxxxxxxx
> -----------------------------------------------------------
> 

-----------------------------------------------------------
To subscribe/unsubscribe: 
        Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
        with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum
or go to http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
        Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ?  DON'T DO IT HERE!  
Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------

Other related posts: