[PCB_FORUM] Designating NC pins in DxD and keep them out of the Allegro netlist?

Hi,

I am using DxD/Viewdraw, and netlisting to Allegro.

I have a no-connect symbol (that is type pin, so no component gets in the
netlist) that I attach to all my intentionally not connected pins, that will
avoid the single pin net warning on the pins I know aren't connected.  I
will still get a warning on the single pins nets that should be connected.
The problem is, the NC net still gets put in the netlist.  I haven't figured
a way to get what I want on the schematic and not get something that I don't
want in the netlist.

Anyone figured out a way to do this?

Regards,

Austin

-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: