[PCB_FORUM] Re: Dangling Lines Removal
- From: "Christian Deldicque" <Christian.Deldicque@xxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Tue, 22 Nov 2005 14:46:39 +0100
Dangling Lines in one motion:
menu: route -> gloss -> parameters -> tick and set inside "line
smoothing " submenu.
________________________________
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Vince Di Lello
Sent: Tuesday, November 22, 2005 2:22 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Dangling Lines Removal
Good morning fellow designers,
Question for everyone - is there a way in Allegro to easily remove
Dangling Lines in one motion, or do they have to be removed one by one?
Any help would be greatly appreciated. Thanks to all in advance.
Vincent Di Lello, CID+
Senior CAD Designer
Kaleidescape Canada, Inc.
vdilello@xxxxxxxxxxxxxxxx
(v) 519.772.6418
(f) 519.772.6401
www.kaleidescape.com
Other related posts: