[PCB_FORUM] Re: DXF problem

 Has anyone noticed that during a DXF import, that all DXF layers are
imported regardless of what is checked for import in the Layer
Conversion File? Ver. 16.0
 
Cheers!
Dale


-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of RANGANATHAN
MURALIDHARAN
Sent: September 6, 2007 11:51 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: RE: [PCB_FORUM] DXF problem


Make sure you enabled the incremental addition, so the dxf data will be
added to your board file

Regards
Murali

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx on behalf of Chandrakanth
Gajawada
Sent: Thu 9/6/2007 10:44 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] DXF problem
 
Hi Folks,

 

When I import DXF into PCB using File import DXF option, all the data in
my
Database vanishes and I am left with only DXF in my board.

 

I generally export sub drawing of it and import back to my actual board
file. Please let me know why this happens.

 

I use PCB performance 15.5

 

Regards

Chandrakanth Gajawada

-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: