[PCB_FORUM] Re: Converting Pentax to Gerber 274 format

I think that we got it working out of Valor.  Thank you all for the support.

Seiji

From: "Paul Gingras" <paul@xxxxxxx>
Reply-To: icu-pcb-forum@xxxxxxxxxxxxx
To: <icu-pcb-forum@xxxxxxxxxxxxx>
CC: "'MIKE'" <mike@xxxxxxxxxxxxxx>
Subject: [PCB_FORUM] Re: Converting Pentax to Gerber 274 format
Date: Thu, 25 Jan 2007 15:38:53 -0500

I do have a Pentax plotter but it takes Gerber files and associated macro files. If you have them send me the files in question I might be able to convert them for you.Or contact  me:

 

Mike Amorelli

Northeast Plotting, Inc.

Ph. 603.579.5454

Fax 603.579.5455

Mike@xxxxxxxxxxxxxx

 

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Jeff Miller
Sent: Thursday, January 25, 2007 2:53 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Converting Pentax to Gerber 274 format

Pentax is a difficult format to find support for these days. It is mostly just supported by vendors that have had support for it since their inception. CAM350 never supported the Pentax format and to my knowledge still does not today. Graphicode on the other had should still have support for it. We do not support it with GerbTool either Ëjust not enough call for it.

 

 

 

Jeffery D Miller

Vice President

Sales & Marketing

 

 

E-Mail: jmiller@xxxxxxxx

Phone: 503-554-8855 x229

Fax: 866-595-6308

 

Visit our Web site at: http://www.wssi.com

 

 

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of george.h.patrick@xxxxxxxxxxxxxx
Sent: Thursday, January 25, 2007 11:15 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Converting Pentax to Gerber 274 format

 

 

Read it into Valor, export it as gerber.  Probably do the same with CAM360, GCCAM Edit, or other gerber editing packages.

 

Easy, yes.  Cheap, no :)

 

 

--
George Patrick
Tektronix, Inc.
Central Engineering, EDS Applications Support
P.O. Box 500, M/S 39-512
Beaverton, OR 97077-0001
ナ 503-627-5272 (voice)     ニ 503-627-5587 (fax)
http://www.tektronix.com    http://www.pcb-designer.com
 
"Off-Grid and Proud of it!"

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of arimitsu seiji
Sent: Thursday, January 25, 2007 10:44
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Converting Pentax to Gerber 274 format

Hello again everyone!

I have a customer that has a old gerber data in Pentax format.  I was wondering if there is an easy method for converting the Pentax files to Gerber 274 format.  If anyone have any suggestions I would really appreciate it.

Thank you,

Seiji

----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list go to http://www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx -----------------------------------------------------------


><< image001.jpg >>
----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list go to http://www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx -----------------------------------------------------------

Other related posts: