[PCB_FORUM] Re: Converting Pentax to Gerber 274 format

Pentax is a difficult format to find support for these days. It is mostly
just supported by vendors that have had support for it since their
inception. CAM350 never supported the Pentax format and to my knowledge
still does not today. Graphicode on the other had should still have support
for it. We do not support it with GerbTool either - just not enough call for
it.

 

 

 

Jeffery D Miller

Vice President

Sales & Marketing

 



 

E-Mail: jmiller@xxxxxxxx

Phone: 503-554-8855 x229

Fax: 866-595-6308

 

Visit our Web site at: http://www.wssi.com <http://www.wssi.com/> 

 

 

  _____  

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of
george.h.patrick@xxxxxxxxxxxxxx
Sent: Thursday, January 25, 2007 11:15 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Converting Pentax to Gerber 274 format

 

 

Read it into Valor, export it as gerber.  Probably do the same with CAM360,
GCCAM Edit, or other gerber editing packages.

 

Easy, yes.  Cheap, no :)

 

 

-- 
George Patrick
Tektronix, Inc.
Central Engineering, EDS Applications Support
P.O. Box 500, M/S 39-512
Beaverton, OR 97077-0001
* 503-627-5272 (voice)     * 503-627-5587 (fax) <http://www.tektronix.com/> 
http://www.tektronix.com     <http://www.pcb-designer.com/>
http://www.pcb-designer.com
 
"Off-Grid and Proud of it!"

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of arimitsu seiji
Sent: Thursday, January 25, 2007 10:44
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Converting Pentax to Gerber 274 format

Hello again everyone!

I have a customer that has a old gerber data in Pentax format.  I was
wondering if there is an easy method for converting the Pentax files to
Gerber 274 format.  If anyone have any suggestions I would really appreciate
it.

Thank you,

Seiji

----------------------------------------------------------- To
subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe To view the archives of this list
go to http://www.freelists.org/archives/icu-pcb-forum/ Problems or
Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

JPEG image

Other related posts: