[PCB_FORUM] Re: Converting Pentax to Gerber 274 format
- From: <george.h.patrick@xxxxxxxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Thu, 25 Jan 2007 11:15:16 -0800
Read it into Valor, export it as gerber. Probably do the same with
CAM360, GCCAM Edit, or other gerber editing packages.
Easy, yes. Cheap, no :)
--
George Patrick
Tektronix, Inc.
Central Engineering, EDS Applications Support
P.O. Box 500, M/S 39-512
Beaverton, OR 97077-0001
* 503-627-5272 (voice) * 503-627-5587 (fax)
<http://www.tektronix.com/>
http://www.tektronix.com <http://www.pcb-designer.com/>
http://www.pcb-designer.com
"Off-Grid and Proud of it!"
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of arimitsu seiji
Sent: Thursday, January 25, 2007 10:44
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Converting Pentax to Gerber 274 format
Hello again everyone!
I have a customer that has a old gerber data in Pentax format. I was
wondering if there is an easy method for converting the Pentax files to
Gerber 274 format. If anyone have any suggestions I would really
appreciate it.
Thank you,
Seiji
----------------------------------------------------------- To
subscribe/unsubscribe: Send a message to
icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or
unsubscribe To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/ Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
Other related posts:
