[PCB_FORUM] Re: Converting Colors

George,

If you are talking about the number (38) in line "cvf select_color_cell 38", 
then I may have the answer for you.

Please see attached PP file, there are two color pallette, the first section 
starts from 0 across to 15 and the second row starts from 16 until 31 and so 
on. The second section starts from 97. You can also customize your color and 
save them for later use.


Hsin-Huei

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx 
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Barbara Seeger
Sent: Thursday, April 17, 2008 4:05 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Converting Colors




George,

The 16.0 ISR was updated after the 16.0 original release. The script recording 
was not storing information based on the class/subclasses changed and instead 
saved the grid location in the form. That made scripts limited.

The ISR scripts will record a color change like this:

color192
setwindow cvf.dialog
cvf layer_mode
setwindow pcb
generaledit
setwindow cvf.dialog
cvf select_color_cell 38
cvf layers_color board_geometry/ncroute_path 39 cvf okay setwindow pcb


The same thing in the early 16.0 version recorded this way and you didn't know 
what it really touched:

color192
generaledit
setwindow cvf.dialog
cvf select_color_cell 38
cvf layer_grid_clr 3 218 70 55255
cvf okay


Is this what you are referring to?

Regards,
Barbara Seeger - Cadence Design Systems - 978-262-6578


> From: george.h.patrick@xxxxxxxxxxxxx
>
>
> I am having a problem with scripting color palette changes in Allegro 16.x.
The number used in the scripting is very large, and I can't find how it's 
calculated.  Has anyone else tackled this yet?
>
> I thought at first it was the color values used by Microsoft in some
> of their
form stuff,  where the number is: (Red)+(256*Green)+(65536*Blue).  In this, 
black is 0 and white is 16777215.
>
> This is not the case in this scheme.  Does anyone know how to calculate this?
It is going to be very un-fun to have to record a script to manually enter the 
colors my users are used to :{
>
> --
> George Patrick
> Tektronix, Inc.
> Central Engineering, EDS Applications Support P.O. Box 500, M/S 39-512
> Beaverton, OR 97077-0001
> * 503-627-5272 (voice)     * 503-627-5587 (fax)
> http://www.tektronix.com<http://www.tektronix.com/>
http://www.pcb-designer.com<http://www.pcb-designer.com/>
>
> "Off-Grid and Proud of it!"
>

-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

[CONFIDENTIALITY AND PRIVACY NOTICE]

Information transmitted by this email is proprietary to Medtronic and is 
intended for use only by the individual or entity to which it is addressed, and 
may contain information that is private, privileged, confidential or exempt 
from disclosure under applicable law. If you are not the intended recipient or 
it appears that this mail has been forwarded to you without proper authority, 
you are notified that any use or dissemination of this information in any 
manner is strictly prohibited. In such cases, please delete this mail from your 
records.
 
To view this notice in other languages you can either select the following link 
or manually copy and paste the link into the address bar of a web browser: 
http://emaildisclaimer.medtronic.com

Other related posts: