[PCB_FORUM] Re: Concept Hilite

Ok, Thanks Charlie.
I guess I have to do that on every project I am working on along with the rest of our group.
Just kind of irritating that there is no way to ignore / disable the expand function if you do not need it.

Thanks again,
Mark

Davies, Charles (cdavies) wrote:

Mark,
If you add what I suggested to the Concept section of the cpm file, you should not be prompted to expand the design. It will expand automatically (you won't be prompted). It needs to expand in order to cross reference, but it only needs to expand once per session.
Hope this helps.

Regards,
Charlie
321.727.6235

    -----Original Message-----
    From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
    [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Mark Salberg
    Sent: Wednesday, April 26, 2006 1:53 PM
    To: icu-pcb-forum@xxxxxxxxxxxxx
    Subject: [PCB_FORUM] Re: Concept Hilite

    Julian and Charlie,
    Thanks for your reply.
    So you are not aware of a way to NOT have Concept ask to expand
    after hiliting in Allegro?

    Usually, if I am simply hiliting / dehiliting things in Allegro, I
    do not want to expand my schematic.
    I just want it to quit asking me and creating a pop-up in Concept
    for EVERY hilite I do in the board.
    Very annoying to hit (NO or X)  50 times if you have hilited 50
    nets in the board.

    This is all I have in my cpm file under Concept.

    START_CONCEPTHDL
    LOGIC_GRID_TOGGLE 'OFF'
    SYMBOL_GRID_TOGGLE 'OFF'
    DOC_GRID_TOGGLE 'OFF'
    CLICK_TO_TYPE 'OFF'
    PLOT_FIT_TO_PAGE 'ON'
    PAPER_SIZE '135'
    PAPER_ORIENTATION '2'
    PAPER_SOURCE '15'
    WPLOTTER_NAME 'Adobe PDF'
    TAP_ADD_SIGNAL 'ON'
    END_CONCEPTHDL

    Regards,
    Mark


    Julian Ungureanu (jungurea) wrote:

I am also interested in this fix.
One comment though: wouldn't you have to wait forever before all
the nets are expanded?
Just curious.
Julian

    ------------------------------------------------------------------------
    From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
    [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Davies,
    Charles (cdavies)
    Sent: Wednesday, April 26, 2006 10:31 AM
    To: icu-pcb-forum@xxxxxxxxxxxxx
    Subject: [PCB_FORUM] Re: Concept Hilite

Mark,
In the concept section of the cpm file set the following:
EXPAND_BEFORE_GLOBAL_NAVIGATE 'YES'
The default value is 'PROMPT'


    Regards,
    Charlie
    321.727.6235

        -----Original Message-----
        From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
        [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Mark
        Salberg
        Sent: Wednesday, April 26, 2006 11:23 AM
        To: Cadence User Group
        Subject: [PCB_FORUM] Concept Hilite

        Hello all,
        Using Concept and Allegro, when I hilite a net in Allegro, I
        get the following irritating message in concept.
        One message for everything I hilite and I have to click NO or
        (X) on every one of them. This must be done before doing
        anything else in the schematic.

        Pop-up Message reads:
        Do you want to expand to see the net in the entire design?

        Any ideas?

        Thanks,
        Mark

        
_____________________________________________________________________________
        Scanned by IBM Email Security Management Services powered by
        MessageLabs. For more information please visit
        http://www.ers.ibm.com
        
_____________________________________________________________________________


    
_____________________________________________________________________________
    Scanned by IBM Email Security Management Services powered by
    MessageLabs. For more information please visit http://www.ers.ibm.com
    
_____________________________________________________________________________



    
_____________________________________________________________________________
    Scanned by IBM Email Security Management Services powered by
    MessageLabs. For more information please visit http://www.ers.ibm.com
    
_____________________________________________________________________________


_____________________________________________________________________________
Scanned by IBM Email Security Management Services powered by MessageLabs. For more information please visit http://www.ers.ibm.com
_____________________________________________________________________________ 



_____________________________________________________________________________
Scanned by IBM Email Security Management Services powered by MessageLabs. For 
more information please visit http://www.ers.ibm.com
_____________________________________________________________________________

Other related posts: